Bluetooth®
Bluetooth®
Connection
When you connect a Bluetooth device to the unit for
the first time:
1
Register the device by pairing the unit and the
device.
2
Connect the device to the unit. (Page 27)
Registering a new Bluetooth device
Pairing allows Bluetooth devices to communicate with
each other.
• The pairing method differs depending on the
Bluetooth version of the device.
–
For devices with Bluetooth 2.1:
You can pair the device and the unit using SSP
(Secure Simple Pairing) which only requires
confirmation.
–
For devices with Bluetooth 2.0:
You need to enter a PIN code both on the device
and unit for pairing.
• Once the connection is established, it is registered in
the unit even if you reset the unit. Up to five devices
can be registered in total.
• Two devices for Bluetooth phone and one for
Bluetooth audio can be connected at a time.
However, when “BT Audio” is selected as the source,
you can connect up to five Bluetooth audio devices
and switch between these five devices.
• To use the Bluetooth function, you need to turn on
the Bluetooth function of the device.
Information
Bluetooth is a short-range wireless radio
communication technology for mobile devices such as
mobile phones, portable PCs and other devices.
Bluetooth devices can be connected without cables
and communicate with each other.
Note
• While driving, do not perform complicated
operations such as dialing numbers, using the phone
book, etc. When you perform these operations, stop
your car in a safe place.
• Some Bluetooth devices may not connect to this unit
depending on the Bluetooth version of the device.
• This unit may not work for some Bluetooth devices.
• Connecting conditions may vary depending on your
environment.
• For some Bluetooth devices, the device is
disconnected when the unit is turned off.
• If your mobile phone supports PBAP (Phone Book
Access Profile), you can display the following items
on the touch panel when the mobile phone is
connected.
–
Phone book
–
Dialed calls, received calls, and missed calls (up to
10 entries in total)
Preparation
Connect and install the microphone beforehand. For
details, see page 45.
Auto pairing
When
<Auto Pairing>
is set to
[ON]
, Android or iOS
(such as iPhone) devices are automatically paired
when connected via USB. (Page 31)
Pairing a Bluetooth device using SSP (for
Bluetooth 2.1)
When the Bluetooth device is compatible with
Bluetooth 2.1, a pairing request is sent from the
available device.
1
Search for the unit (“JVC KW-V”) from your
Bluetooth device.
2
Confirm the request both on the device
and the unit.
On the device:
On the unit:
To reject the request:
Touch
[Cancel]
.
26
ENGLISH
00_KW-V2018ST_M_ENG.indb 26
00_KW-V2018ST_M_ENG.indb 26
17/6/2017 7:35:49 AM
17/6/2017 7:35:49 AM
