ENGLISH
29
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Audio Settings
[X ‘ OVER TYPE]
Caution
: Adjusts the volume before changing the
[X ‘ OVER TYPE]
to avoid
the sudden increase or decrease of the output level.
• Once you have changed the crossover type, the next time when you turn
on the power, the display shows:
“2-WAY X’OVER” or “3-WAY X’OVER” “PRESS” “VOLUME KNOB”
“TO CONFIRM”
Press the volume knob to acknowledge in order to proceed to the next
desired operation.
[2-WAY]
(Displayed only when
[3-WAY]
is selected.)
[YES]
: Selects two way crossover type. ;
[NO]
: Cancels.
[3-WAY]
(Displayed only when
[2-WAY]
is selected.)
[YES]
: Selects three way crossover type. ;
[NO]
: Cancels.
[SOUND EFFECT]
[SPACE ENHANCE]
(Not applicable for FM/AM source.)
[SMALL]
/
[MEDIUM]
/
[LARGE]
: Virtually enhances the sound space. ;
[OFF]
: Cancels.
[SND RESPONSE]
[LEVEL1]
/
[LEVEL2]
/
[LEVEL3]
: Virtually makes the sound more realistic. ;
[OFF]
: Cancels.
[SOUND LIFT]
[LOW]
/
[MIDDLE]
/
[HIGH]
: Virtually adjusts the sound position heard from
the speakers. ;
[OFF]
: Cancels.
[VOL LINK EQ]
[ON]
: Boosts the frequency to reduce the noise heard from outside the car
or running noise of the tyres. ;
[OFF]
: Cancels.
[K2 TECHNOLOGY]
(Not applicable for FM/AM source, SIRIUS XM source and AUX source.)
[ON]
: Improves the sound quality of compressed music. ;
[OFF]
: Cancels.
Speaker output settings
[SPK/PRE OUT]
(Applicable only if
[X ' OVER TYPE ]
is set to
[2-WAY]
)
Select the output setting for the speakers
[SPK/PRE OUT]
, based on the speaker
connection method.
Connection via lineout terminals
For connections through an external amplifier (Page 43)
Setting on
[SPK/PRE OUT]
Audio signal through lineout terminal
FRONT
REAR
SW
[REAR/REAR]
(default) Front speakers
output
Rear speakers output
Subwoofer output
[SUB.W/SUB.W]
Front speakers
output
L (left): Subwoofer output
R (right): (Mute)
Subwoofer output
Connection via speaker leads
You can also connect the speakers without using an external amplifier
but still being able to enjoy the subwoofer output with these settings.
(Page 42)
Setting on
[SPK/PRE OUT]
Audio signal through rear speaker lead
L (left)
R (right)
[REAR/REAR]
Rear speakers output
Rear speakers output
[SUB.W/SUB.W]
Subwoofer output
(Mute)
If
[SUB.W/SUB.W]
is selected:
–
[120HZ]
is selected in
[SUBWOOFER LPF]
and
[THROUGH]
is not available.
(Page 31)
–
[POSITION R02]
is selected in
[FADER]
and selectable range is
[POSITION R15]
to
[POSITION 00]
. (Page 28)
KW_R950BTS_K_B5A-3883-00_EN_1st Draft.indd 29
KW_R950BTS_K_B5A-3883-00_EN_1st Draft.indd 29
9/7/2021 11:39:37 PM
9/7/2021 11:39:37 PM
