16
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
JVC Remote Application
You can control the JVC car receiver from iPhone/iPod touch (via Bluetooth
or via USB input terminal) or Android device (via Bluetooth) using
JVC Remote application.
• For more information, visit <https://www.jvc.net/cs/car/>.
Preparation:
Install the latest version of JVC Remote application on your device before
connecting.
Start using JVC Remote application
1
Start up the JVC Remote application on your device.
2
Connect your device.
• For Android device:
Pair the Android device with this unit via Bluetooth. (Page 17)
• For iPhone/iPod touch:
Connect iPhone/iPod touch to the USB input terminal. (Page 9)
(or)
Pair the iPhone/iPod touch with this unit via Bluetooth. (Page 17)
(Make sure the USB input terminal is not connected to any device.)
3
Select the device to use from the menu.
See the following “Settings to use JVC Remote application”.
By default,
[ANDROID]
is selected. To use iPhone/iPod touch, select
[YES]
for
[IOS]
.
Settings to use JVC Remote application
1
Press and hold
MENU.
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected or activated.
4
Press
MENU to exit.
To return to the previous setting item, press
.
Default:
[XX]
[REMOTE APP]
[SELECT]
Selects the device (
[IOS]
or
[ANDROID]
) to use the application.
[IOS]
[YES]
: Selects iPhone/iPod touch to use the application via Bluetooth or
connected via USB input terminal. ;
[NO]
: Cancels.
If
[IOS]
is selected, select iPod BT source (or iPod FRONT/iPod REAR/iPod USB
source if your iPhone/iPod touch is connected via USB input terminal) to activate
the application.
• See “Set the playable source for iPod/iPhone” on page 10 for further
information.
• The connectivity of the application will be interrupted or disconnected if:
– You change from iPod BT source to any playback source connected via the
USB input terminal.
– You change from iPod FRONT/iPod REAR/iPod USB source to iPod BT source.
[ANDROID]
[YES]
: Selects Android device to use the application via Bluetooth. ;
[NO]
: Cancels.
[ANDROID
LIST]
Selects the Android device to use from the list.
• Displayed only when
[ANDROID]
of
[SELECT]
is set to
[YES]
.
[STATUS]
Shows the status of the selected device.
[IOS CONNECTED]
: You are able to use the application using the iPhone/
iPod touch connected via Bluetooth or USB input terminal.
[IOS NOT CONNECTED]
: No iOS device is connected to use the application.
[ANDROID CONNECTED]
: You are able to use the application using the Android
device connected via Bluetooth.
[ANDROID NOT CONNECTED]
: No Android device is connected to use the
application.
KW_R950BTS_K_B5A-3883-00_EN_1st Draft.indd 16
KW_R950BTS_K_B5A-3883-00_EN_1st Draft.indd 16
11/7/2021 3:21:31 PM
11/7/2021 3:21:31 PM