ENGLISH
21
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Bluetooth®
Store a contact in memory
You can store up to 6 contacts into the number buttons (1 to 6).
1
Press
to enter Bluetooth mode.
2
Turn the volume knob to select
[RECENT CALL]
,
[PHONEBOOK]
or
[DIAL NUMBER]
, then press the knob.
3
Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone
number.
4
Press and hold one of the number buttons (1 to 6).
“MEMORY P(selected preset number)” appears when the contact is
stored.
To erase a contact from the preset memory, select
[DIAL NUMBER]
in step 2,
store a blank number in step 3 and proceed to step 4.
Make a call to a registered number
1
Press
to enter Bluetooth mode.
2
Press one of the number buttons (1 to 6).
3
Press the volume knob to call.
“NO PRESET” appears if there is no contact stored.
Bluetooth mode settings
1
Press and hold
MENU.
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press
MENU to exit.
To return to the previous setting item, press
.
Default:
[XX]
[BT MODE]
[PHONE SELECT]
Selects the phone or audio device to connect or disconnect.
“ ” appears in front of the device name when connected.
“
” appears in front of the current playback audio device.
• You can connect a maximum of two Bluetooth phones and one Bluetooth
audio device at a time.
[AUDIO SELECT]
[DEVICE DELETE]
1
Turn the volume knob to select a device to delete, then press the knob.
2
Turn the volume knob to select
[YES]
or
[NO]
, then press the knob.
[PIN CODE EDIT]
(0000)
Changes the PIN code (up to 6 digits).
1
Turn the volume knob to select a number.
2
Press
S
/
T
to move the entry position.
Repeat step 1 and step 2 until you finish entering the PIN code.
3
Press the volume knob to confirm.
[RECONNECT]
[ON]
: The unit is automatically reconnect when the last connected
Bluetooth device is within the connectable range. ;
[OFF]
: Cancels.
[AUTO PAIRING]
[ON]
: The unit is automatically paired with the supported Bluetooth
device (iPhone/iPod touch) when it is connected through USB input
terminal. Depending on the operating system of the connected device, this
function may not work. ;
[OFF]
: Cancels.
[INITIALIZE]
[YES]
: Initializes all the Bluetooth settings (including stored pairing,
phonebook, and etc.). ;
[NO]
: Cancels.
[INFORMATION]
[MY BT NAME]
: Displays the name of your receiver (“KW-R950BTS”/
“KW-X855BTS”/“KW-X850BTS”). ;
[MY ADDRESS]
: Shows address of this unit.
KW_R950BTS_K_B5A-3883-00_EN_1st Draft.indd 21
KW_R950BTS_K_B5A-3883-00_EN_1st Draft.indd 21
9/7/2021 11:39:36 PM
9/7/2021 11:39:36 PM