JVC KS-LH60R Скачать руководство пользователя страница 42

Страница: 42 / 48

ENGLISH

MAINTENANCE

This unit requires very little attention, but you will
be able to extend the life of the unit if you follow
the instructions below.

To clean the head

• Clean the heads after every 10 hours of use

using a wet-type head cleaning tape (available
at an audio store).
When the head becomes dirty, you may realize
the following symptoms:

– Sound quality is reduced.
– Sound level decreases.
– Sound drops out.

• Do not play dirty or dusty tapes.
• Do not touch the highly-polished head with any

metallic or magnetic tools.

To keep the tape clean

• Always store the cassettes in their storage

cases after use.

• Do not store cassettes in the following places:

– Subject to direct sunlight
– With high humidity
– At extremely hot temperatures

CAUTION:

• Do not play the cassettes with peeling labels;

otherwise, they can damage the unit.

• Tighten tapes to remove slack since loose tape

may become entangled with the mechanism.

• Do not leave a cassette in the cassette

compartment after use, as the tape may become
slack.

The function below is also provided to ensure the
longer life of this unit.

Ignition key-off release/Ignition key-on
play

• Turning off the ignition key with a cassette in

the compartment automatically releases the
tape from the unit’s tapehead.

• Turning on the ignition key with a cassette in

the compartment starts playback automatically
if you turned off the ignition during tape play.

EN40-43KS-LH60R[E_EX]f.p65

3/7/03, 7:11 PM

Содержание KS-LH60R

















































Результаты поиска

Содержание KS-LH60R

Отзывы:

Похожие инструкции для KS-LH60R

Бренды по названию

Популярные бренды

JVC KS-LH60R, Инструкция по эксплуатации

Результаты поиска

Содержание KS-LH60R

Отзывы:

Похожие инструкции для KS-LH60R

Бренды по названию

Популярные бренды