22
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Audio Settings
Speaker output settings
[SPK/PRE OUT]
(Applicable only if
[X ' OVER TYPE ]
is set to
[2-WAY]
) (page 21)
Select the output setting for the speakers
[SPK/PRE OUT]
, based on the speaker
connection method.
Connection via lineout terminals
For connections through an external amplifier (Page 35)
KD-T952BT:
Setting on
[SPK/PRE OUT]
Audio signal through lineout terminal
FRONT
REAR
SW
[REAR/REAR]
(default) Front speakers
output
Rear speakers output
Subwoofer output
[SUB.W/SUB.W]
Front speakers
output
L (left): Subwoofer output
R (right): (Mute)
Subwoofer output
KD-T752BT:
Setting on
[SPK/PRE OUT]
Audio signal through lineout terminal
REAR/SW
[REAR/REAR]
Rear speakers output
[REAR/SUB.W]
(default) Subwoofer output
[SUB.W/SUB.W]
Subwoofer output
Connection via speaker leads
You can also connect the speakers without using an external amplifier
but still being able to enjoy the subwoofer output with these settings.
(Page 34)
Setting on
[SPK/PRE OUT]
Audio signal through rear speaker lead
L (left)
R (right)
[REAR/REAR]
Rear speakers output
Rear speakers output
[REAR/SUB.W]
*
Rear speakers output
Rear speakers output
[SUB.W/SUB.W]
Subwoofer output
(Mute)
If
[SUB.W/SUB.W]
is selected:
–
[120HZ]
is selected in
[SUBWOOFER LPF]
and
[THROUGH]
is not available.
(Page 24)
–
[POSITION R02]
is selected in
[FADER]
and selectable range is
[POSITION R15]
to
[POSITION 00]
. (Page 21)
* Except for KD-T952BT.
JS_JVC_KD_T952BT_M_EN_1.indd 22
JS_JVC_KD_T952BT_M_EN_1.indd 22
1/3/2021 10:24:27 AM
1/3/2021 10:24:27 AM