Https://www.bueno-electric.com
BUENO ELECTRIC
BUENO ELECTRIC
BUENO ELECTRIC
BUENO ELECTRIC
Contact: [email protected]
Fax: +86-25-51816989
41
After the setting zone is selected . Press
【
←┘
】
key to get the setting alteration window :
Setting alteration (area 0)
Control character 1 …..0000
Control character 2 ………100.0A
Current zone I …….. 200.0A
Note : The system defaulted setting will be displayed for the invalid setting zone.
After entering setting alteration window, press“
∧
” or “
∨
” key and “<” or “>” key to select the
position for alteration. Press “+” or “
－
” key to make alteration. For the contents in the effective
bit of the control character, press “>” key and hold it for 3 seconds, the selective submenu
containing the contents in the effective bit of the control character are displayed. In the submenu,
effective bit or the control character can be easily put in-service or out of service. But the
combined control bit must be entered through the manual calculation.
Control character
Current zone I without direction ±
Current zone II without direction
Current zone III without direction
After alteration, press
【
←┘
】
key to confirm. In case of giving up the alteration, press “Q” key.
The system will return to the main menu.
After all the alterations are completed, press
【
←┘
】
key to solidify. In case of giving up the
alteration, press “Q” key, the system will return to the previous menu.
Before solidification, the system wants you to identify the target zone to perform the
alteration. By doing so, the alteration or duplication of a setting zone can be realized.
Setting solidification
Select setting zone : 00±
Current operating zone : 01
When the target solidification zone is selected, press
【
←┘
】
key to solidify. The system asks
you enter the secret . The process is the same as the setting switchover and will not to be repeated
here.
2.2.9.4 Time adjustment
