Https://www.bueno-electric.com
BUENO ELECTRIC
BUENO ELECTRIC
BUENO ELECTRIC
BUENO ELECTRIC
Contact: [email protected]
Fax: +86-25-51816989
40
If the secret codes are in error, a news block for the error secret codes is displayed.
If the secret code' are correct, news block for the correct secret codes is displayed.
Pressure plate setup
Pressure plate setup is successful!
Pressure plate setup
Secret code error!
Re-input secret code 00
Under any conditions, when “Q” key is pressed, system will return back to the previous
menu.
2.2.9.2 Setting switchover
Select sub-menu “setting switchover” under the menu “operation setup” or press the setting
switchover key directly, a setting switchover window will be seen :
Setting switchover
Select setting zone : 00±
Current operating zone : 01
Use “+” or “
-
” key to select the setting zone you want to switchover (also it can be done by
the setting switchover keys). If you want to give up the switchover, just press Q key. Press
【
←┘
】
key to start the switchover. The system asks you enter the secret codes. The process is the same as
the pressure plate switchover and will not be repeated.
Several setting zone are provided for storage. Before operating a setting switchover, care
must be taken that the zone you want to switchover must already have its settings, otherwise, you
cannot make any change. By using command “setting switchover”, you can write several sets of
settings in the zone and then make changes.
2.2.9.3 Setting alteration
Select the sub-menu “setting alteration” under the menu “operation setup”. The system will
ask you which area you want to alter :
Setting alteration
Select setting zone : 00±
Current operating zone : 01