ENGLISH
4
GETTING STARTED
Cancel the demonstration
When you turn on the power for the first time (or
[FACTORY RESET]
is set to
[YES]
), the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”
1
Press the volume knob.
[YES]
is selected for the initial setup.
2
Press the volume knob again.
“DEMO
OFF”
appears.
Set the clock and date
1
Press and hold
.
2
Turn the volume knob to select
[CLOCK]
, then press the knob.
To adjust the clock
3
Turn the volume knob to select
[CLOCK ADJUST]
, then press the knob.
4
Turn the volume knob to make the settings, then press the knob.
Hour Minute
5
Turn the volume knob to select
[CLOCK FORMAT]
, then press the knob.
6
Turn the volume knob to select
[12H]
or
[24H]
, then press the knob.
To set the date
7
Turn the volume knob to select
[DATE SET]
, then press the knob.
8
Turn the volume knob to make the settings, then press the knob.
Day Month Year
9
Press
to exit.
To return to the previous setting item, press
.
1
2
Set the basic settings
1
Press and hold
.
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3
Repeat step
2
until the desired item is selected or activated.
4
Press
to exit.
To return to the previous setting item, press
.
Default:
XX
SYSTEM
KEY BEEP
(Not applicable when 3-way crossover is selected.)
ON
: Activates the keypress tone. ;
OFF
: Deactivates.
SOURCE SELECT
AM SRC
*
ON
: Enables AM in source selection. ;
OFF
: Disables.
( 5)
PANDORA SRC
*
ON
: Enables PANDORA in source selection. ;
OFF
: Disables.
( 9)
IHEART SRC
*
ON
: Enables IHEARTRADIO in source selection. ;
OFF
: Disables.
( 10)
BUILT-IN AUX
*
ON
: Enables AUX in source selection. ;
OFF
: Disables.
( 21)
F/W UPDATE
UPDATE SYSTEM
F/W UP xxxx
YES
: Starts upgrading the firmware. ;
NO
: Cancels (upgrading is not
activated).
For details on how to update the firmware, visit
<http://www.jvc.net/cs/car/>.
FACTORY RESET
YES
: Resets the settings to default (except the stored station). ;
NO
: Cancels.
* Not displayed when the corresponding source is selected.
3
JS_JVC_KD_X340BTS_K_EN_3.indd 4
9/8/2016 10:34:44 AM