background image

iii

SOFTWARE LICENSE AGREEMENT

The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is 
copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions 
which Users shall follow in order to use the Licensed Software.

The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement. 
This Agreement shall be deemed completed at the time the User (hereinafter the "User") initially used the 
Product in which the "Licensed Software" is embedded.

The Licensed Software may include the software which has been licensed to the Licensor directly or 
indirectly from any third party.  In such case, some third parties require the Users to follow their conditions 
for use separately from this Software License Agreement. Such software shall not be subject to this 
Agreement, and the Users are urged to read the "Important Notice concerning the Software" to be provided 
separately below.

Article 1 

General Provision

The Licensor shall grant to the User a non-exclusive and non-transferable (other than the exceptional case 
referred to in Article 3, Paragraph 1) licensed to use the Licensed Software within the country of the User. 
(the country where the User bought the Product(hereinafter the "Country")

Article 2 

License

1.  The license granted under this Agreement shall be the right to use the Licensed Software in the 

Product.

2.  The User shall not duplicate, copy, modify, add, translate or otherwise alter, or lease the Licensed 

Software and any related documents, whether in whole or in part.

3.  The use of the Licensed Software shall be limited to personal purpose, and the Licensed Software shall 

not be distributed, licensed or sub-licensed whether it is for commercial purpose or not.

4.  The User shall use the Licensed Software according to the directions described in the operation 

manual or help file, and is prohibited to use or duplicate any data in a manner violating the Copyright 
Law or any other laws and regulations by applying whole or a part of the Licensed Software.

Article 3 

Conditions for Grant of License

1.  When the User transfers the Product, it may also transfer the license to use the Licensed Software 

embedded in the Product (including any related materials, updates and upgrades) on condition that 
no original, copies or related materials continue in the possession of the User, and that the User shall 
cause the transferee to comply with this Software License Agreement.

2.  The User shall not carry out reverse engineering, disassembling, decompiling or any other code 

analysis works in connection with the Licensed Software.

Article 4 

Right pertaining to the Licensed Software

Any and all copyrights and other rights pertaining to the Licensed Software and related documents 
shall belong to the Licensor or the original holder of the right who granted to the Licensor the license or 
sublicense for the Licensed Software (hereinafter the "Original Rightholder"), and the User shall not be 
entitled to any right other than the license granted hereunder, in respect of the Licensed Software and any 
related documents.

Article 5 

Indemnification of Licensor

1.  Neither the Licensor nor the Original Rightholder shall be liable for any damage incurred by the User 

or any third party due to the exercise of the license granted to the User under this Agreement, unless 
otherwise restricted by law.

2.  The Licensor will offer no guarantee for the merchantability, convertibility and consistency with 

certain objective of the Licensed Software.

Article 6 

Liability to Third Party

If any dispute has arisen with any third party due to an infringement upon a copyright, patent or any 
other intellectual property right that was caused by the User's use of the Licensed Software, the User shall 
settle such dispute at its own cost and hold the Licensor and the Original Rightholder harmless from any 
inconvenience it may cause.

Article 7 

Confidentiality

The User shall keep the confidentiality of such portion of the Licensed Software, related documents thereof 
or any other information to be granted under this Agreement, as well as the conditions of this Agreement 
as has not yet entered the public domain, and shall not disclose or divulge the same to any third party 
without approval of the Licensor.

JS_JVC_KD_X340BTS_K_C.indd   iii

8/22/2016   3:22:16 PM

Содержание KD-R988BT














































Отзывы: