9
ENGLISH
Storing stations in memory
You can use one of the following two methods to
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-
station Sequential Memory)
• Manual preset of both FM and AM stations
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM band
(FM1, FM2 and FM3).
1
Select the FM band (FM1–3) you want
to store FM stations into.
1
Press SOURCE to select
FM as the source.
2
If necessary, press and
hold MODE BAND to
select the FM band
number (FM1, FM2 or
FM3).
Each time you press and hold the button,
the FM band changes as follows:
2
Press and hold both buttons for more
than 2 seconds.
Local FM stations with the strongest signals are
searched and stored automatically in the band
number you have selected (FM1, FM2 or FM3).
These stations are preset in the number buttons
— No.1 (lowest frequency) to No.6 (highest
frequency).
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in.
“SSM” appears, then disappears when automatic
preset is over.
2
Press and hold
¢
or
4
until
“M” (manual) starts flashing on the
display.
3
Tune into a station you want while “M”
is flashing.
• If you release your finger from the button,
the manual mode will automatically turn off
after 5 seconds.
• If you hold down the button, the frequency
keeps changing (in 50 kHz intervals for FM
and 9 kHz intervals for AM — MW/LW) until
you release the button.
When an FM stereo broadcast is hard to
receive:
1
Press MODE BAND while listening to an FM
stereo broadcast (the ST indicator lights up
while receiving an FM stereo broadcast).
“MODE” appears on the lower part of the
display, and the number buttons can work as
different function buttons.
2
Press MONO, while “MODE” is still on the display,
so that the MO indicator lights up on the display.
The sound you hear becomes monaural but the
reception will be improved (the ST indicator goes
off).
Each time you press the button, the MO indicator
lights up and goes off alternately.
FM1
FM2
FM3
BAND
Press
4
to tune into
stations of lower frequencies.
BAND
Press
¢
to tune into
stations of higher frequencies.
EN07-10.KD-LX110R[E]f
2/6/01, 2:37 PM
9
