JVC JY-VS200, Инструкция по эксплуатации

Страница: 41 / 96

EN
41
PLAYBACK
Advanced Features For Video
M D O E SOUND
M D O E 12B I T
RO SYNCH
ODE REC M
I N UT S / AV P
COPY
STEREO –
SOUND 1
SP
OF F
OF F
–
–
–
–
–
N RETUR
O . O
Using Menus For Detailed Adjustment
The following procedure applies to all except Synchro
Comp ( pg. 69, 70).
1
Set the Power Switch to “ ” while pressing down
the Lock Button located on the switch.
2
Press the MENU wheel. The Menu Screen appears.
3
Rotate the MENU wheel to select the desired function
menu, and press it. The selected function menu appears.
4
Rotate the MENU wheel to select the desired
function, and press it to display the Sub Menu.
5
Rotate the MENU wheel to select the desired
parameter and press it. Selection is complete.
6
Rotate the MENU wheel to select “ 1 RETURN” and
press it twice to close the Menu Screen.
NOTES:
●
It is also possible to change the ON SCREEN settings by
pressing
DISPLAY on the remote control (provided).
●
“REC MODE” can be set when the Power Switch is set to
“
” or “ ” ( pg. 15, 29).
●
When “S/AV INPUT” is set to “ON”, camcorder
playback cannot be viewed on the AV output.
Display
Power Switch
MENU Wheel
pg. 42.
pg. 42.
pg. 70.
Allows you to set the video recording mode (SP or LP) depending on your preference
(
pg. 15).
It is recommended you use “REC MODE” in the “ VIDEO” Menu when using this
camcorder as a recorder during dubbing ( pg. 58, 59).
ON : Enables dubbing of images recorded on a tape to a memory card ( pg. 60).
OFF : Enables snapshots to be taken during video playback.
ON : Enables audio/video signal input from the AV and S-VIDEO connectors ( pg. 58).
OFF : Enables audio/video signal output to a TV, VCR, etc. via the AV and S-VIDEO
connectors ( pg. 54, 58).
Makes a beep or melody sound/activates the shutter sound effect.
Turns on/off the tally lamp.
Starts automatic demonstration.
Turns on/off the Microphone Level Indicator.
Makes color bars appear/disappear.
Makes the camcorder’s indications appear/disappear from the connected TV screen.
Makes the date/time appear/disappear on the camcorder.
Makes the time code appear/disappear on the camcorder.
SOUND MODE
12BIT MODE
SYNCHRO
REC MODE
COPY
S/AV INPUT
BEEP*
TALLY*
DEMO MODE*
MIC IND.*
COLOR BAR*
ON SCREEN*
DATE/TIME*
TIME CODE*
Menu Screen
Lock Button
Recording Start/Stop Button
VIDEO
DISPLA
Y
SYSTEM
* Each setting is linked with “ DISPLAY” or “ SYSTEM”, which appears when the Power Switch is set to “ ”
( pg. 30, 31). The parameters are the same as in the description on pg. 30, 31.