1-22 (No.YA061)
H. POSITION
Signal
generator
Remote
control unit
[4.DEF]
4.H-CENT
(1) Receive the circle pattern signal.
(2) Set the ZOOM mode to FULL.
(3) Select 4.DEF from the SERVICE MENU.
(4) Select < 4.H-CENT >.
(5) Set the initial setting value of < 4.H-CENT >.
(6) Adjust horizontal position to make C=D.
(7) Press the [MENU] key and memorize the set value.
H. SIZE
Signal
generator
Remote
control unit
[4.DEF]
5.H-SIZE
(1) Receive the circle pattern signal.
(2) Set the ZOOM mode to FULL.
(3) Select 4.DEF from the SERVICE MENU.
(4) Select < 5.H-SIZE >.
(5) Set the initial setting value of < 5.H-SIZE >.
(6) Adjust to make sure that the horizontal screen size
of the picture size is in the bellow table.
(7) Make sure that the horizontal screen size of the each
ASPECT mode is in the below table.
(8) Press the [MENU] key and memorize the set value.
NOTE :
14 : 9 ZOOM and REGULAR are length of 90%.
The value in ( ) shows NTSC adjustment value.
SIDE-PIN
Signal
generator
Remote
control unit
[4.DEF]
7.EW-PIN
(1) Receive the crosshatch signal.
(2) Set the ZOOM mode to FULL.
(3) Select 4.DEF from the SERVICE MENU.
(4) Select < 7.EW-PIN >.
(5) Set the initial setting value of < 7.EW-PIN >.
(6) Adjust to make the 2nd vertical lines at the left and
right edges of the screen straight. Also make sure
that the 3rd vertical lines are straight.
(7) Press the [MENU] key and memorize the set value.
Item
Measuring
instrument
Test point
Adjustment part
Description
C
D
MODE
FULL
PANORAMIC SUBTITLE
28inch
32inch
[SCREEN SIZE]
14:9 ZOOM REGULAR
91%
91%
95% (94%)
95% (94%)
92%
92%
570mm
495mm
510mm
450mm
Straight
