JVC InteriArt AV-28R47SK Скачать руководство пользователя страница 15

Страница: 15 / 29

(No.YA061)1-15

4.6

BASIC OPERATION OF SERVICE MENU

4.6.1 TOOL OF SERVICE MENU OPERATION

Operate the SERVICE MENU with the REMOTE CONTROL UNIT.

4.6.2 SERVICE MENU ITEMS

With the SERVICE MENU, various adjustments can be made, and they are broadly classified in the following items of settings.

4.6.3 BASIC OPERATION OF SERVICE MENU
(1) HOW TO ENTER SERVICE MENU

Press the [INFORMATION] key and the [MUTING] key of the
REMOTE CONTROL UNIT simultaneously, and the SERVICE
MENU screen of Fig.1 will be displayed.

Fig.1

(2) SELECTION OF SUB MENU SCREEN

Press one of [1] - [5] keys of the REMOTE CONTROL UNIT
and select the SUB MENU SCREEN (See “SERVICE MENU
FLOW CHART”), form the SERVICE MENU.

Fig.2

(3) METHOD OF SETTING

1.IF

[1.VCO] : It must not adjust without signal.

2.V/C, 4.DEF AND 5.VSM PRESET.

3.AUDIO, 6.VPS, and 7.SHIPPING.

[Do not setting]

(4) RELEASE OF SERVICE MENU

After completing the setting, return to the SERVICE MENU, then again press the [INFORMATION] key.

1.IF

This mode adjusts the setting values of the IF circuit.

2.V/C

This mode adjusts the setting values of the VIDEO circuit.

3.AUDIO

This mode adjusts the setting values of the multiplicity AUDIO circuit.

[Do not adjust]

4.DEF

This mode adjusts the setting values of the DEFLECTION circuit for each aspect mode given below.

5.VSM PRESET

This mode adjusts the initial setting values of COOL, NORMAL and WARM. (VSM : Video Status Memory)

6.VPS

This mode shows the monitor of the VPS, PDC, WSS and SN.

[Do not adjust]

7.SHIPPING(OFF)

This mode is set at shipping.

[Do not adjust]

SERVICE MENU

1. IF

2. V/C

3. AUDIO

4. DEF

5. VSM PRESET

6. VPS

7. SHIPPING (OFF)

Names of key

INFORMATION

MUTING

FUNCTION UP/DOWN

FUNCTION -/+

Key

NAME OF REMOTE CONTROL KEY

Key

Function

(1) [1]

Select 1.IF

(2) [1]

Select 1.VCO (CW)
Make sure that the arrow position between the ABOVE REF and BELOW REF.

(3) [INFORMATION]

Return to the SERVICE MENU screen.

Key

Function

(1) [2] / [3] / [4] / [5]

Select one from 2.V/C, 4.DEF and 5.VSM PRESET.

(2) [FUNCTION UP / DOWN (

)] Select setting items.

(3) [FUNCTION -/+ (

)]

Set (adjust) the setting values of the setting items.

(4) [OK]

Memorize the setting value.(Before storing the setting values in memory, do not press
the CH, TV, POWER key if you do, the values will not be stored in memory.)

(5) [INFORMATION]

Return to the SERVICE MENU screen.

Содержание InteriArt AV-28R47SK






























Результаты поиска

Содержание InteriArt AV-28R47SK

Отзывы:

Похожие инструкции для InteriArt AV-28R47SK

Бренды по названию

Популярные бренды

JVC InteriArt AV-28R47SK, Руководство по обслуживанию

Результаты поиска

Содержание InteriArt AV-28R47SK

Отзывы:

Похожие инструкции для InteriArt AV-28R47SK

Бренды по названию

Популярные бренды