JVC HV-29WZ, Инструкция по эксплуатации

Страница: 33 / 40

33
HV-34LZ/29WZ / LCT1200-001A-H / ENGLISH
Additional preparation
Conditions to use the AV
COMPU LINK remote
control system
• A device equipped with an AV COMPU
LINK terminal is required.
• You must connect the TV and the device
with an AV COMPU LINK cable.
AV COMPU LINK cable is not supplied
with this TV. If an AV COMPU LINK cable
is unavailable, connect them with a cable
with dia. 3.5 mm (mono) male plugs at
both ends.
• You must connect the device to an
appropriate VIDEO terminal and set it up
correctly. Otherwise the AV COMPU LINK
remote control system will not function
correctly. For details, see "Setting up the
AV COMPU LINK remote control system".
• The TV must be in standby mode (the
POWER lamp lighting red). If the TV's
Main power is off (the POWER lamp off),
the AV COMPU LINK remote control
system does not function.
Setting up the AV COMPU
LINK remote control system
CAUTION:
• With some devices, the setup method
differs from the ones explained here.
Be sure to read the device's instruction
manual thoroughly before setting it up.
1 Connect the device to the TV's
VIDEO-1 or VIDEO-2 terminal.
If you want to connect a DVD
player to the TV with a
component video cable:
Connect the DVD player to the TV's VIDEO-3
terminal.
• For detailed connecting instructions, see
"Connecting the exterminal devices" on
page 31.
Connecting AV COMPU
LINK Supported Devices
AV COMPU LINK remote control system is a
system in which related devices are
automatically controlled when you operate
one device.
If you apply this system to the TV, you can
have the TV automatically perform the
required operations by operating one
external device. You don't have to use the
TV's remote control to turn on the TV or
change the VIDEO modes.
Examples of the AV
COMPU LINK remote
control system operations
Simply by pressing the PLAY button on a
VCR or a DVD player, you can view images
from the device.
Simply by inserting a prerecorded tape (a
tape with the record safety tab removed) to a
VCR, you can view the tape.
Simply by operating the AV Control Receiver,
you can have the TV turned on/off (in
standby mode) or the VIDEO mode changed
correctly.
• The performance of the AV COMPU LINK
remote control system varies depending
on the connected device. See the
device's instruction manual.
• When you select "TV SOUND" as the
input source with the AV Control
Receiver, there are cases where the TV's
MUTING function automatically operates
and the sound from the TV's speakers is
muted.
In such cases, press the VOLUME-/+
buttons or the MUTING button on the
TV's remote control to cancel the
MUTING function. You can regain the
sound from the TV's speakers.
LCT1200-001A-H_P19-40.p65 9/8/2002, 15:17PM 33