manualshive.com logo in svg

JVC HR-XV45SEF, Руководство по обслуживанию

Поделиться
Скачать
JVC HR-XV45SEF Скачать руководство пользователя страница 87

Installation and Setup

Connecting to Optional Equipment

Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic

II

/Pro Logic

Connect the Left and Right AUDIO OUT jacks on this
unit to the audio left and right in jacks on your amplifi-
er, receiver or stereo system, using the audio cables.

Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby Digital™, MPEG 2 or DTS)

1. Connect this unit’s DIGITAL AUDIO OUT jack

(COAXIAL) to the corresponding in jack on your
amplifier. Use an optional digital (coaxial) audio
cable.

2. Y

ou will need to activate this unit’s digital output.

(See “AUDIO” on page 19).

Digital Multi-channel sound

A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your unit (MPEG 2, Dolby
Digital and DTS). Check the receiver manual and the
logos on the front of the receiver.

Warning:

Due to the DTS Licensing agreement, the digital 
output will be in DTS digital out when DTS audio
stream is selected.

Notes:

If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will 
produce a strong, distorted sound or no sound at all. 

To see the audio format of the current DVD in the
On-Screen Display, press 

A.MONITOR

.

11

2 channel analog stereo or Dolby Surround connection.

Rear of this unit

Amplifier (Receiver)

DVD exclusive out

Digital multi-channel
connection

L

R

AUDIO INPUT

DIGITAL INPUT

COAXIAL

Содержание HR-XV45SEF










































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды