JVC HR-XV45SEF Скачать руководство пользователя страница 107

Страница: 107 / 169

Operation

Audio CD and MP3 Disc
Features

Pause

1. Press

during playback.

2. To return to playback, press

, ENTER or press

again.

Moving to another Track

1. Press

briefly during playback to go to

the next track or to return to the beginning of the
current track.

2. Press

twice briefly to go back to the previous

track.

3. In case of audio CD, to go directly to any track,

enter the track number using the numbered
buttons (0-9).

Repeat Track/All/Off

You can play a track/all on a disc.

1. Press REPEAT when playing a disc.

The repeat icon appears.

2. Press REPEAT to select a desired repeat mode.

• Track: repeats the current track
• All: repeats all the tracks on a disc.
• Off(No display): does not play repeatedly.

Note:

If you press

once during Repeat Track playback, the

repeat playback cancels.

Search

1. Press

during playback.

2. Press

repeatedly to select the required

speed: X2, X4, X8 backward or forward.

3. To exit SEARCH mode, press

Random

1. Press RANDOM during playback or when

playback is stopped. Random Playback begins
immediately and RANDOM appears on the menu
screen.

2. To return to normal playback, press RANDOM

repeatedly until RANDOM disappears from the
menu screen.

Tip:

By pressing

during random playback, the unit selects

another track and resumes random playback.

Repeat A-B

1. To repeat a sequence during disc playback press

REPEAT A-B at your chosen starting point.
The Repeat icon and “A” appear on the menu
screen.

2. Press REPEAT A-B again at your chosen end

point.
The Repeat icon and “A-B” appear on the menu
screen, and the sequence begins to play
repeatedly.

3. To exit the sequence and return to normal play,

press REPEAT A-B again. The Repeat icon
disappears from the menu screen.

3D Surround

To produce a 3D surround effect that simulates
multi-channel audio from two stereo speakers (instead
of the five+ speakers normally required for
multi-channel audio from a home theater system).

1. Press A.MONITOR during playback.

“3D SUR.” appears on the menu screen.

2. To return to normal playback, press A.MONITOR

repeatedly until “3D SUR.” disappears from the
menu screen.

MP3

Содержание HR-XV45SEF










































































































































































Результаты поиска

Содержание HR-XV45SEF

Отзывы:

Бренды по названию

Популярные бренды

JVC HR-XV45SEF, Руководство по обслуживанию

Результаты поиска

Содержание HR-XV45SEF

Отзывы:

Бренды по названию

Популярные бренды