JVC HR-XV45SEF Скачать руководство пользователя страница 108

Страница: 108 / 169

Programmed Playback

The program function enables you to store your
favorite tracks from any disc in the player memory.
A program can contain 30 tracks.

1. Insert a disc.

Audio CD or MP3 Discs:

AUDIO CD or MUSIC menu appears.

2. Press MNL.PROG..

The

mark will appear to the right of the word

“Program” on the right side of the menu screen.

Note:

Press MNL.PROG. again, then the

mark will

disappear to exit the Program Edit mode.

Audio CD Menu

MP3 Menu

Video CD:

Press MNL.PROG. while playback is

stopped. The program menu appears.
Press MNL.PROG. to exit the menu.

Note:

On a Video CD with PBC, you must set PBC to Off on
the setup menu to use the programmed playback
(See “PBC” on page 20).

Video CD Menu

3. Select a track on the “List”, then press ENTER to

place the selected track on the “Program” list.
Repeat to place additional tracks on the list.

4. Press

Select the track you want to start playing on the
“Program” list.

5. Press

or ENTER to start. Playback begins in

the order in which you programmed the tracks.
Playback stops after all of the tracks on the
“Program” list have played once.

6. To resume normal playback from programmed

playback, select a track of CD (or MP3) list and
then press

Repeat Programmed Tracks

1. Press REPEAT when playing a disc. The repeat

icon appears.

2. Press REPEAT to select a desired repeat mode.

• Track: repeats the current track
• All: repeats all the tracks on programmed list.
• Off(No display): does not play repeatedly.

Note:

If you press

once during Repeat Track playback, the

repeat playback cancels.

Erasing a Track from Program List

1. Video CD : Press MNL.PROG. in the stop mode to

enter Program Edit mode.

2. Press

to move to the “Program” list.

3. Use

to select the track that you wish to erase

from the “Program” list.

4. Press CLEAR (

). Repeat to erase additional

tracks on the list.

Erasing the Complete Program List

1. Follow steps 1-2 of “Erasing a Track from Program

List” as above.

2. Use

to select “Clear All”, then press ENTER.

The complete Program for the disc will be erased.

Note:

The programs are also cleared when the disc is
removed.

Program

List

Track1

Track4

Track7

Track5

Track2

Track3

Track4

Track5

Track6

Track7

Track8

AUDIO CD

0:52:07

1 / 12

Clear All

PROGRAM

Edit

Program

List

Track1

Track3

Track2

Track5

Track2

Track3

Track4

Track5

Clear All

VIDEO CD

Program

List

0:00:00

1 / 12

Clear All

PROGRAM

Edit

MUSIC

DISPLAY

Info

2-Music2

4-Music4

6-Music6

1-Music1

3-Music3

4-Music4

5-Music5

6-Music6

7-Music7

Содержание HR-XV45SEF










































































































































































Результаты поиска

Содержание HR-XV45SEF

Отзывы:

Похожие инструкции для HR-XV45SEF

Бренды по названию

Популярные бренды

JVC HR-XV45SEF, Руководство по обслуживанию

Результаты поиска

Содержание HR-XV45SEF

Отзывы:

Похожие инструкции для HR-XV45SEF

Бренды по названию

Популярные бренды