April 20, 2004 9:28 am
Page 8
— 8 —
Master Page: Right
Playing back tape repeatedly (100 times)
— Repeat Playback
During playback, press and hold
4
for more than 5 seconds. “
$
”
on the display panel starts blinking slowly. To stop playback, press
8
on the remote control or
0
on the recorder.
NOTE:
Pressing
4
,
3
,
5
or
9
also stops Repeat Playback.
Locating beginning of recordings
— Index Search
Index codes are placed on the tape at the
beginning of each recording when
recording on this recorder.
A
While the tape is not running, press
w
or
e
(
2
or
6
) to start search.
B
To access a recording of 2 to 9 index
codes away, press
w
or
e
(
2
or
6
)
repeatedly until the correct number is displayed on the screen
(only if “O.S.D.” is set to “ON” (
墌
12)).
Example:
To locate the beginning of B from
the current position, press
w
twice.
To locate the beginning of D from
the current position, press
e
once.
●
Playback begins automatically
when the desired recording is
located.
Locating beginning of timer recordings
— Instant Review
After ensuring that the recorder is turned off and that the timer
mode is disengaged, press
REVIEW
.
●
The recorder turns on, and rewinds to the index code indicating
the beginning of the last timer-recorded programme, then begins
playback automatically.
●
You can access a programme as far as
9 index codes away from the current tape
position.
●
The Instant Review function can also
operate if the recorder is turned on.
Skipping unwanted portions
— Skip Search
Press
30 SEC
once to 4 times during playback. Each press
initiates a 30-second period of high-speed playback (up to
2 minutes). When the specified portion of the tape is skipped,
normal playback resumes automatically. To return to normal
playback during Skip Search, press
4
.
Accidental erasure prevention
To prevent accidental recording on a
recorded cassette, remove its record
safety tab. To record on it later, cover
the hole with adhesive tape.
Basic Recording
A
Load a cassette
Make sure the record safety tab is intact. If not, cover the hole with
adhesive tape before inserting the cassette.
●
The recorder turns on, and the counter is reset, automatically.
B
Select recording channel
Press
PR
r
/
t
or the
number keys
on the remote control or
PR+/–
on the recorder.
●
You can select channel in the stop mode or recording pause mode.
C
Start recording
On the recorder, press
7
. Or on the remote control, while holding
7
, press
4
.
NOTE:
If the tape reaches its end during recording, the recording stops
and “
䡬
” and “
$
” on the display panel blink. Press
0
on the
recorder to eject the cassette or press
3
to rewind the tape.
Current position
Index number
Recording
Turn on the TV and select the video channel or AV mode.
During recording
Pause recording
Press
9
.
●
Press
4
to resume recording.
●
You can select channel in the recording pause mode.
Stop recording
Press
8
on the remote
control.
OR
Press
0
on the recorder.
Record safety tab
HR-V210_001EN.fm Page 8 Tuesday, April 20, 2004 9:28 AM
