JVC HM-DSR100RU - Digital VCR And Satellite Dish Combo, Инструкция по эксплуатации

Страница: 83 / 207

Page 4-37
2. Press any front panel button on your recorder, except the
Power
button. If the front
panel is working correctly, the recorder briefly displays a message that says "Front
Panel button." If the front panel is not working correctly, the recorder displays a
failure message. See the Diagnostic Test section of the Problems and Solutions
Tables on page A-18.
3. Press the Power button or Cancel button to
end the test.
Note:
If you press the
Power
button to end
the test, your recorder powers OFF.
Using the System
Diagnostic Tests
4
POWER
CA
NC
EL
R
EMOTE
C
ONTROL
D
IAGNOSTIC
T
EST
This test verifies that the buttons on your remote control are working correctly.
1. Select the Remote Control option.
2. Press any remote control button, except the Power , the Cancel , the Address , or the
VCR buttons. If the remote control is working correctly, the recorder briefly displays
a message that says "Remote Control button." If the remote control is not working
correctly, the recorder displays a failure message. See the Diagnostic Test section of
the Problems and Solutions Tables on page A-18.
Note:
This test does not cover the
Address
button.
3. Press the Power button or Cancel button to
end the test.
Note:
If you press the
Power
button to end
the test, your recorder powers OFF.
Remote
Menu Options
Buttons
POWER
CA
NC
EL
2 Remote Control
2