JVC GZMC500US - Everio Camcorder - 1.33 MP, Руководство по обслуживанию, Страница: 28 / 44

1-28 (No.YF100)
3.2.2 ASSEMBLY/DISASSEMBLY OF CABINET PARTS AND ELECTRICAL PARTS
z Disassembly procedure
NOTE1a:
When removing the COVER(FR.)ASSEMBLY, remove the
SCREW (1-4) first for the smooth removal of other parts.
NOTE1b:
When removing, remove the four SCREWS (1-4) first to
avoid damage or deformation of the ARM (COVER) AS-
SEMBLY and the STAY (COVER) ASSEMBLY.
During the procedure, be careful with opening and closing of
the BATTERY/ CF CARD COVER.
Also, be careful not to damage the parts with the ARM
(COVER) ASSEMBLY or the STAY (COVER) ASSEMBLY.
NOTE1c:
Be careful in handling the SPACER.
Attach the SPACER to adjust the edge of CN302.
NOTE1d:
When attaching, be careful not to pinch the WIRE.
Pay special attention on the inside of the TRIPOD and the
BATTERY wiring.
NOTE2a:
Although the illustration shows the battery/ CF card cover
closed, leave the cover open during the actual procedure.
NOTE2b:
When removing the COVER(FR.)ASSEMBLY, remove the
SCREW (8,9) first for the smooth removal of other parts.
NOTE2c:
When removing, be careful not to lose the SHAFT(BELT).
NOTE4a:
When attaching, be careful with the position of the FPC.
NOTE4b:
During the procedure, be careful in handling the WIRE.
NOTE5:
When removing, be careful not to lose the part.
NOTE6a:
During the procedure, be careful not to damage the CON-
NECTOR or cut/break the WIRE.
NOTE6b:
When removing, be careful in handling the SPACER.
NOTE6c:
Be careful with the wiring and the affixing the SPACER.
NOTE6d:
When attaching, be sure to place the FPC WIRE inside.
NOTE6e:
When attaching, lift the part (ARM) upward.
NOTE6f:
During the procedure, be careful not to deform the part
(ARM) or damage other parts.
NOTE7a:
Be careful with the positions of the SCREWS that are to be
removed.
NOTE7b:
During the procedure, be careful with the grease.
NOTE8:
When attaching, be careful with the wiring,
z Destination of connectors
GRIP LOWER ASSY
COVER(FR.) ASSY
GRIP LOWER ASSY
TRIPOD
BATT. CASE ASSY
COVER(TOP)
REG BOARD ASSY
CF ASSY
PLATE(ROTALY)
MONITOR ASSY
CAMERA ASSY
[1]
[2]
[1]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
HOOD ASSY,2(S1a),2(S1b)
S2a,S2b,2(S2c),S2d
2(S1c),L1a, L1b,CN1a,b
2(S3)
3(S4),SPACER
S5a,S5b,2(S5a),L5
SPACER
SPACER,CN6a,b,2(S6),CN6c,L6,d,e,f,g,h
-
2(S7a),S7b,CN7a,b,L7a,b
3(S8)
-
3(S9)
- FA1
FA2
FA3-1
FA3-2
FA3-3
FA4
FA5-1
FA5-2
FA5-3
FA6
FA7-1
FA7-2
FA8
NOTE1a,b
NOTE2a,b,c
NOTE1c,d
-
NOTE4a,b
NOTE5
NOTE6a,b
NOTE6c
NOTE6d,e,f
NOTE7a,b
NOTE8
NOTE8
NOTE9
-
STEP
No.
PART NAME
Fig.
No.
POINT NOTE
CN1a REG CN305 OPE3 - 6
CN1b REG CN307 BATT_TERM - 6
CN6a REG CN301 ANALOG CN206 10
CN6b REG CN302 ANALOG CN207 27
CN6c REG CN309 CF CN9904 20
CN6d REG CN303 ANALOG CN208 30
CN6e REG CN306 LCD-SUB CN7802 30
CN6f REG CN310 CF SW - 2
CN6g REG CN304 OPE2 - 12
CN6h REG CN308 CDS, DIGITAL CN5103,103 11/4,7
CN7a CF CN9901 DIGITAL CN9801 27
CN7b CF CN9902 DIGITAL CN9802 27
CONNECTOR CN.NO.
PIN
NO.