JVC GZMC500US - Everio Camcorder - 1.33 MP Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 44

JVC GZMC500US - Everio Camcorder - 1.33 MP Скачать руководство пользователя страница 18

1-18 (No.YF100)

(3) Choose a destination folder, then press the "Next" but-

ton.

(4) Press the "Next" button to proceed with the installation.

(5) When "Installation Complete" is displayed, press the

"Close" button to finish the installation.

(6) Check whether the "HiTest" icon is on the desktop.

4. Preparation for start up

(1) Double click the "HiTest" icon on the desktop to start the

software.

(2) The User Information window is displayed.

(3) Input the information of the person who carries out the

test, then press the "OK" button.

User Name: Input your name in one-byte alphabetical
characters.
Customer Name: Input JVC in one-byte characters.
Location: Input the division where you belong to in one-
byte alphabetical characters.(e.g. JSCA)
Tester Name: Name the PC on which the test is carried
out.
This is to specify the PC where the test is carried out for
later checking of the PC performance.
Input any number such as "PC1" in one-byte alphabeti-
cal characters.

Press "Next" button.

Press "Next" button.

Press "Close" button.

User Information window

Press the "OK" button

«
...
16
17
18
19
20
...
»

Содержание GZMC500US - Everio Camcorder - 1.33 MP













































Отзывы:

Нет отзывов