JVC GY-HM620E, Инструкция

Страница: 91 / 192

During Playback or Pause Screen
1
Press [FOCUS ASSIST/1] button during clip
playback.
0
If the clip does not have an OK mark, an OK
mark will be appended.
0
If the clip is appended with an OK mark, the
OK mark will be deleted.
.
1000/2000
12:34:56 12:34:56
Jan 12,2016 Jan 12,2016
00:00:00.00 00:00:00.00
40 4030 30 20 20 10 10 0
282min 282min
1920x1080 1920x1080
60i HQ
60i HQ
1000/2000 1000/2000
OK Mark
Memo :
0
The clip pauses when an OK mark is appended
or deleted during playback.
Appending/Deleting OK Mark of
Multiple Clips
To select and append/delete OK mark for multiple
clips, refer to “[Selecting and Performing
Operations on Multiple Clips] (
A
P 91)”.
Selecting and Performing
Operations on Multiple
Clips
0
Multiple clips can be selected during thumbnail
screen or playback screen display.
0
After selecting multiple clips, perform
appending/deleting of OK mark, deleting of clips
using the action selection screen.
0
After selecting multiple clips, the selections will
be canceled by the following operations.
0
When [Deselect All] in the action menu is
selected
0
When exiting Media mode from the thumbnail
screen
0
When removing the SD card
0
When switching the slot in use
Selecting Multiple Clips Randomly
1 Move the cursor to a clip without check
mark, and press the [OIS/2] button.
A green check mark appears on the clip.
.
1
2
Repeat Step
1
to select multiple clips.
0
Multiple clips can be selected.
0
Press the [LOLUX/3] button while the
multiple clips are selected.
0
Appends OK mark together:
[Add OK Mark]
B
[Selected Clips]
0
Deletes OK mark together:
[Delete OK Mark]
B
[Selected Clips]
0
Uploading selected clips to the FTP server
together
a
:
[FTP Upload]
B
[Selected Clips]
0
Deletes selected clips together:
[Delete Clips]
B
[Selected Clips]
Memo :
0
Selecting clips appended with check mark and
pressing the [OIS/2] button will cancel the
selection.
0
If the operation is performed on multiple clips at
the same time, a progress bar appears. You can
stop the operation by pressing the Set button (
R
)
while the operation is in progress. However, it is
not possible to undo operations that are
completed.
91
Playback