JVC GY-HM620E, Инструкция

Страница: 125 / 192

No. of Frames for
W
Frame & Bit
Rate
Resolution
Setting values
(
R
: default value)
60p, 60i, 30p 1920x1080 60i (12.0 M),
R
60i (8.0 M) (*1),
60i (5.0 M),
60i (3.0 M)
1280x720 30p (8.0 M),
30p (5.0 M),
30p (3.0 M),
30p (1.5 M)
720x480 60i (8.0 M),
60i (5.0 M),
60i (3.0 M),
60i (1.5 M),
60i (0.8 M),
60i (0.3 M)
640x360 30p (3.0 M),
30p (1.5 M),
30p (0.8 M),
30p (0.3 M)
50p, 50i, 25p 1920x1080 50i (12.0 M),
R
50i (8.0 M) (*2),
50i (5.0 M),
50i (3.0 M)
1280x720 25p (8.0 M),
25p (5.0 M),
25p (3.0 M),
25p (1.5 M)
720x576 50i (8.0 M),
50i (5.0 M),
50i (3.0 M),
50i (1.5 M),
50i (0.8 M),
50i (0.3 M)
640x360 25p (3.0 M),
25p (1.5 M),
25p (0.8 M),
25p (0.3 M)
*1 Default value for U model
*2 Default value for E model
Memo :
0
The settings cannot be changed during live
streaming.
0
An encoding bit rate exceeding 5.0 Mbps cannot
be selected when [Type] is set to “MPEG2-
TS/RTP” or “RTSP/RTP”.
0
An encoding bit rate exceeding 5.0 Mbps cannot
be selected when [Type] is set to “ZIXI” and
[Latency] is set to other than “Low”.
0
An encoding bit rate exceeding 3.0 Mbps cannot
be selected when [Type] is set to “ZIXI” and
[Latency] is set to “Low”, or when [Type] is set to
“RTMP”.
Connection Setup
For specifying the settings for connecting to the
network.
A [Wizard] screen will appear according to the
adapter connected to the rear [HOST] terminal.
Follow the instructions to perform the setting.
You can Load, Store, and Delete the settings
specified on the [Wizard] screen.
9 Wizard
A [Wizard] screen appears according to the type of
adapter that is connected to the rear [HOST]
terminal.
Follow the instructions.
9 Load
Loads the settings on the [Wizard] screen.
(
A
P174 [Reading the Connection Settings
File] )
9
Store
Saves the settings on the [Wizard] screen.
(
A
P173 [Saving the Connection Settings File] )
9 Delete
Deletes the saved settings.
(
A
P174 [Deleting Connection Settings] )
9
APN
For specifying APN (Access Point Name).
* This item is grayed out and cannot be selected if
APN cannot be set for the adapter attached.
Caution :
0
The APN setting is written into the cellular
adapter, not this camera recorder.
Setting a wrong APN may result in
communication failure or expensive bills from
the telecommunications company. Set the APN
correctly.
(
A
P152 [Connecting via Cellular Adapter] )
Metadata Server
For registering the FTP server for importing the
metadata and the path of the file to be imported.
Up to 4 settings can be registered.
125
Menu
Display and
D
etailed
S
etti
ngs