JVC GY-HM620E, Инструкция

Страница: 100 / 192

User Switch Set Item
USER1 to USER7, LCD KEY▲, LCD KEY▶,
LCD KEY▼, LCD KEY◀
By assigning one of the following functions to each
of the [FOCUS ASSIST/1], [OIS/2], [LOLUX/3], [AE
LOCK/4], [ZEBRA/5], [MARKER/6], [C.REVIEW/7]
buttons or the cross-shaped buttons on the LCD
monitor, these buttons can be used to control the
assigned function (on/off, start, switch).
Set according to the shooting conditions. Usable
only in the Camera mode.
[Setting Values: None, Bars, Flash Band, Lolux, AE
Lock, Face Detect, OIS, One Push Iris, One Push
Focus, Preset Zoom1, Preset Zoom2, Preset
Zoom3, White Balance, Zebra, Marker, Focus
Assist, Spot Meter, Expanded Focus, LCD
Backlight, Backup Trig, Clip Cutter Trig, OK Mark,
Clip Review, Load Picture File, Live Streaming
a
]
Front REC
For setting the function of the [REC] button located
below the lens at the front of the unit.
0
REC:
Functions as a record button for starting/ending
recording.
0
AWB:
When the [WHT BAL B/A/PRESET] selection
switch is set to “A” or “B” in the Manual White
Balance mode, it functions as an AWB startup
button. If the [WHT BAL B/A/PRESET] selection
switch is set to “PRESET”, it functions as a
button for switching between two color
temperature settings.
(
A
P59 [Manual White Balance Mode (Manual
Switching)] )
0
None:
Disabled.
[Setting Values:
R
REC, AWB, None]
Lolux
To increase the sensitivity when in dim
surroundings, set a value in the Lolux mode.
[Setting Values: 36dB,
R
30dB]
Clip Review
For specifying the operation when any of the
[USER1]-[USER7], [LCD KEY▲], [LCD KEY▶],
[LCD KEY▼], or [LCD KEY◀] items is set to “Clip
Review”.
0
Last 5sec:
Views about 5 seconds of the clip from the
ending.
0
Top 5sec:
Views about 5 seconds of the clip from the
beginning.
0
Clip:
Views the entire clip.
[Setting Values:
R
Last 5sec, Top 5sec, Clip]
Memo :
0
This item is selectable when any of the [USER1]-
[USER7], [LCD KEY▲], [LCD KEY▶], [LCD
KEY▼], [LCD KEY◀] items is set to “Clip
Review”.
Spot Meter
For specifying the operation when any of the
[USER1]-[USER7], [LCD KEY▲], [LCD KEY▶],
[LCD KEY▼], or [LCD KEY◀] items is set to “Spot
Meter”.
(
A
P72 [Setting Spot Meter] )
0
Max & Min:
Displays the brightest and darkest areas of the
image.
0
Max:
Displays the brightest area of the image.
0
Min:
Displays the darkest area of the image.
0
Manual:
Displays the image brightness at a specified
position.
[Setting Values:
R
Max & Min, Max, Min, Manual]
100
Menu
Display and
D
etailed
S
etti
ngs