JVC GR-DVM50 Скачать руководство пользователя страница 67

Страница: 67 / 80

SYMPTOM

POSSIBLE CAUSES

CORRECTIVE ACTION

33.

The tape is moving, but
there is no picture.

34.

The LCD monitor indications
are distorted.

35.

Images on the LCD monitor
are jittery.

36.

The LCD monitor, the
viewfinder and the lens have
become dirty (ex. fingerprints).

37.

An unusual mark appears.

38.

An error indication
(E01 — E06) appears.

39.

The charger indicator on the
AC Power Adapter/Charger
does not light.

40.

The recording mode
indicator “LP” blinks.

41.

Picture does not appear on
the LCD monitor.

42.

When the image is printed
from the printer, a black bar
appears at the bottom of the
screen.

43.

When the camcorder is
connected via the DV
connector, the camcorder
does not operate.

33.

• Your TV has AV input terminals,

but is not set to its VIDEO mode.

• The cassette’s cover is open.

34.

• During playback of the

unrecorded portion, High-
speed Search and still
playback, LCD monitor
indications appear distorted.
This is not a defect.

35.

• The speaker volume is too

great.

36.

————

37.

————

38.

• A malfunction of some kind

has occurred. In this case the
camcorder’s functions
become unusable.

39.

• The temperature of the battery

is extremely high/low.

• Charging is difficult in places

subject to extremely high/low
temperatures.

40.

• This occurs when recording in

the LP mode is not available.
After the indicator blinks, the
recording mode switches to
“SP” and recording goes on.

41.

• The viewfinder is pulled out.
• The LCD monitor's brightness

setting is too dark.

42.

• This is not a malfunction.

43.

• The DV cable was plugged/

unplugged with power turned
on.

33.

• Set the TV to the mode or

channel appropriate for video
playback (

pg. 46, 47).

• Close the cassette’s cover

(

pg. 11).

34.

————

35.

• Turn the speaker volume

down (

pg. 42).

36.

• Wipe them gently with soft

cloth. Wiping strongly can
cause damage.

37.

• Check the section of the

manual that explains LCD
monitor/viewfinder
indications (

pg. 72, 73).

38.

• Remove the power supply

(battery pack, etc.) and wait a
few minutes for the indication
to clear. When it does, you can
resume using the camcorder.
If the indication remains even
though you repeat the above
two or three times, please
consult your nearest JVC dealer.

39.

• To protect the battery, it is

recommended to charge it in
places with a temperature of
10°C to 35°C (50°F to 95°F)
(

pg. 75).

40.

————

41.

• Push the viewfinder back in.
• Adjust the brightness of the

LCD monitor (

pg. 19).

• If the monitor is tilted upward

180 degrees, open the
monitor fully (

pg. 18).

42.

• By recording with “DIS”

activated (

pg. 29) this can

be avoided.

43.

• Turn the camcorder’s power

off and on again, then operate
it.

Содержание GR-DVM50
















































































Результаты поиска

Содержание GR-DVM50

Отзывы:

Похожие инструкции для GR-DVM50

Бренды по названию

Популярные бренды

JVC GR-DVM50, Инструкция по эксплуатации

Результаты поиска

Содержание GR-DVM50

Отзывы:

Похожие инструкции для GR-DVM50

Бренды по названию

Популярные бренды