EN
57
T
W
MAKE CONNECTIONS
Also refer to pg. 46, 47 and 49.
1
CONNECT TO . . .
JVC VCR EQUIPPED WITH REMOTE PAUSE
TERMINAL
Connect the editing cable to the Remote PAUSE
terminal.
JVC VCR NOT EQUIPPED WITH REMOTE
PAUSE TERMINAL BUT EQUIPPED WITH
R.A. EDIT CONNECTOR
Connect the editing cable to the R.A.EDIT
connector.
VCR OTHER THAN TYPE
OR
Connect the editing cable to the RM-V713U’s
PAUSE IN connector.
2
PREPARE CAMCORDER
Insert a recorded tape and set the Power Switch to
“
” while pressing down the Lock Button.
3
PREPARE VCR
Turn the power on, insert a recordable tape and
engage the AUX mode (refer to VCR’s instructions).
SELECT SCENES
4
START SOURCE PLAYBACK
Press
PLAY
(
4
) and then press
R.A. EDIT ON/OFF
on
the remote control. Make sure to point the remote
control at the camcorder’s remote sensor.
•The Random Assemble Editing Menu appears.
5
EXECUTE FADE/WIPE IN
(IF NECESSARY)
Press
FADE/WIPE
on the remote control.
•Cycle through the effects by pressing repeatedly,
and stop when the one you want is displayed.
•You cannot use a Picture Wipe/Dissolve at the
beginning of Program 1.
CONTINUED ON NEXT PAGE
FADE/WIPE
PLAY
R.A.EDIT
ON/OFF
DISPLAY
To Remote
PAUSE or
R.A. EDIT
S-Video
cable
(optional)
To
S-VIDEO
OUT
To
EDIT
RM-V713U (provided)
VCR
TV
White to
AUDIO L IN
Red to
AUDIO
R IN
To S-VIDEO
IN
To PAUSE IN
NOTES:
●
The S-Video cable and Audio/Video cable (RCA plug to RCA plug) are optional. Be sure to use the following:
•
S-Video cable: YTU94146A
•
Audio/Video cable (RCA plug to RCA plug): YTU94147A
Consult the JVC Service Center described on the sheet included in the package for details on their availability.
●
You can use the AV OUT connector on the camcorder for connection.
●
Before Random Assemble Editing, make sure the indications do not appear on the TV monitor. If they appear during
Random Assemble Editing, they will be recorded onto the new tape. To clear the Playback Sound Mode Display, press
DISPLAY
on the remote control. Select “DISPLAY” and “TIME CODE” from the Playback Menu (
Z
pg. 44) to show or
hide the Date/Time and the Time Code on the recording. To show or hide all indications except for the Random
Assemble Editing Menu, set “INDICATION” to “OFF” in the Playback Menu (
Z
pg. 44) and press
DISPLAY
on the
remote control. When Random Assemble Editing starts, its indications disappear and are not recorded on the new tape.
Red to
AUDIO
R OUT
Yellow to
VIDEO
IN*
Editing
cable
(provided)
*Connect when the S-Video cable is not used.
Yellow to
VIDEO
OUT*
White to
AUDIO
L OUT
Audio/
Video cable
[RCA plug to
RCA plug]
(optional)
