62
EN
T
W
PLA
Y
O
FF
C
A
M
ER
A5S
USING THE REMOTE CONTROL UNIT
(cont.)
Audio Dubbing
The audio track can be customized only when recorded
on the 32 kHz mode (
Z
pg. 30).
NOTES:
●
Audio Dubbing is not possible on a tape recorded at
48 kHz, on a tape recorded in the LP mode or on a blank
portion of a tape.
●
To perform Audio Dubbing while watching in the television,
make connections (
Z
pg. 46).
1
FIND EDIT-IN POINT
Play back the tape to locate the point where editing
will start, then press
PAUSE
(
6
).
2
ENGAGE AUDIO DUB STANDBY
While holding
A.DUB
(
e
) on the remote control,
press
PAUSE
(
6
). “
6e
” appears.
3
BEGIN DUBBING
Press
PLAY
(
4
) , then begin “narrating”.
•Speak into the microphone.
4
PAUSE DURING DUBBING
Press
PAUSE
(
6
).
5
STOP DUBBING
Press
STOP
(
5
).
NOTES:
●
Audio dubbing is also possible using an optional microphone,
which should be connected to the provided Audio cable, with
the Audio Cable connected to the external microphone input
connector (MIC) on the Docking Station. The provided Audio
cable reduces interference.
●
While an optional microphone is connected, the built-in
microphone is disabled.
●
When editing onto a tape that was recorded at 32 kHz, the old
and new soundtracks are recorded separately.
●
To select the desired sound for playback, press
AUDIO
MONITOR
on the remote control.
●
If you dub onto a blank space on the tape, the sound may be
disrupted. Make sure you only edit recorded areas.
●
If feedback or howling occurs during TV Playback, move the
camcorder’s microphone away from the TV, or turn down the
TV’s volume.
●
Sound is not heard from the speaker during Audio Dubbing. To
hear sound, connect optional headphones to the AV OUT
(headphones) connector.
●
If you change from 32 kHz to 48 kHz in mid-recording and then
use the tape for Audio Dubbing, it is not effective from the point
where 48 kHz recording began.
●
During Audio Dubbing, when the tape moves to scenes recorded
in the LP mode, scenes recorded at 48 kHz or a blank portion,
Audio Dubbing stops and “ERROR! REFER MANUAL” appears.
AV OUT
(headphones)
connector
Speaker
DISPLAY
Stereo microphone
RM-V713U
(provided)
STOP
PAUSE
Recording sound
Display
Output sound
32 kHz
FULL SOUND
Original and new tracks are combined and output in stereo.
SOUND 2
New track is output on both “L” and “R” channels in stereo.
SOUND 1
Original track is output on both “L” and “R” channels in stereo.
Audio Dub Standby mode
Power Switch
Remote sensor
External
microphone
input connector
A.DUB
AUDIO
MONITOR
PLAY
Lock Button
Display
Located
beneath
the cover.
