JVC GR-DF473, Инструкция по эксплуатации

Страница: 45 / 84

EN
45
FEATURES FOR RECORDING
MasterPage: Start_Right
AD
V
A
N
C
ED
F
E
A
T
UR
ES
The camcorder’s Full Range AF system offers
continuous shooting ability from close-up (as
close as approx. 5 cm to the subject) to infinity.
However, correct focus may not be obtained
depending on the shooting condition. In this
case, use the manual focus mode.
1
Set the Power Switch to
“
M
”.
2
Press FOCUS. The
manual focus indicator
appears.
3
Press < or > to focus on
a subject.
●
When the focus level
cannot be adjusted any
further or closer, “
” or “ ” will blink.
4
Press SET. Focus adjustment is complete.
To reset to Auto Focus
Press FOCUS twice or set the Power Switch to
“
A
”.
Manual focus is recommended in situations
listed below.
●
When two subjects overlap in the same scene.
●
When illumination is low.*
●
When the subject has no contrast (difference in
brightness and darkness), such as a flat, one-
colour wall, or a clear, blue sky.*
●
When a dark object is barely visible in the LCD
monitor or the viewfinder.*
●
When the scene contains minute patterns or
identical patterns that are regularly repeated.
●
When the scene is affected by sunbeams or light
reflecting off the surface of a body of water.
●
When shooting a scene with a high-contrast
background.
* The following low-contrast warnings appear
blinking: , , and .
Manual exposure control is recommended in the
following situations:
●
When shooting using reverse lighting or when the
background is too bright.
●
When shooting on a reflective natural background
such as at the beach or when skiing.
●
When the background is overly dark or the subject
is bright.
1
Set the Power Switch to “
M
”.
2
Set “
p
” to “MANUAL”. (
墌
pg. 37)
●
The exposure control indicator appears.
3
To brighten the image, press >. To darken the
image, press <. (maximum ±6)
●
+3 exposure has the same effect as the backlight
compensation. (
墌
pg. 46)
●
–3 exposure has the same effect as when “
r
” is
set to “SPOTLIGHT”. (
墌
pg. 49)
4
Press SET. Exposure adjustment is
complete.
To return to automatic exposure control
Select “AUTO” in step
2
. Or, set the Power
Switch to “
A
”.
NOTES:
●
You cannot use the manual exposure control at
the same time when “
r
” is set to “SPOTLIGHT”
or “SNOW” (
墌
pg. 48), or with the backlight
compensation.
●
If the adjustment does not cause any visible
change in brightness, set “GAIN UP” to “AUTO”.
(
墌
pg. 37, 38)
Manual Focus
Manual focus
indicator
Exposure Control
GR-DF573_473ASIA.book Page 45 Monday, June 13, 2005 5:38 PM