ADDITIONAL FEATURES FOR D.S.C.
24
EN
MasterPage: Left
By resetting the file name, a new folder will be made. The
new files you are going to make will be stored in the new
folder. It is convenient to separate the new files from
previously made files.
1
Load a memory card. (
墌
pg. 10)
2
Set the
VIDEO/MEMORY
Switch to “MEMORY”.
3
Set the Power Switch to “PLAY” while pressing down
the Lock Button located on the switch.
●
A stored file is displayed.
4
Press the
M
MENU/VOL.
Wheel in. The Menu Screen
appears.
5
Rotate the
M
MENU/VOL.
Wheel to select “NO.
RESET”, and press it. The NO. RESET screen appears.
6
Rotate the
M
MENU/VOL.
Wheel to select
“EXECUTE”, and press it. The new folder (such as
“101JVCGR”) will be made and the file name of the next
shot starts from DVC00001.
Folder and File names
Each time shooting takes place, a file name is made
using a number which is larger by one than the largest
number of the file names which are in use. Even if you
delete an image or video clip file with a number in the
middle of range, the number will not be used for a new
shot; a gap will remain in the numerical sequence. If the
file name reaches DVC09999, a new folder (such as
“101JVCGR”) will be made and the file name will start
again from DVC00001.
You can initialize a memory card anytime.
After initializing, all files and data stored in the memory
card, including those which have been protected, are
cleared.
1
Set the
VIDEO/MEMORY
Switch to “MEMORY”.
2
Set the Power Switch to “PLAY” while pressing down
the Lock Button located on the switch.
3
Open the LCD monitor fully. (
墌
pg. 12)
4
Press the
M
MENU/VOL.
Wheel in. The Menu Screen
appears.
5
Rotate the
M
MENU/VOL.
Wheel to select “FORMAT”, and
press it. The FORMAT screen
appears.
6
Rotate the
M
MENU/VOL.
Wheel to select “EXECUTE”, and
press it. The memory card is
initialized.
●
When initialization is finished, “NO IMAGES STORED”
appears.
●
To cancel initialization, select “RETURN”.
CAUTION:
Do not perform any other operation (such as turning off the
camcorder) during initialization. Also, be sure to use the
provided AC Adapter, as the memory card may be corrupted
if the battery becomes exhausted during initialization. If the
memory card becomes corrupted initialize it.
Resetting The File Name
Initializing A Memory Card
MENU
D I SPLAY
BR I GHT
END
PROTECT
DELETE
DPOF
NO . RESET
FORMAT
ORMAT
F
EXECUTE
DATA?
EX I ST I NG
ERASE AL L
RETURN
GR-D94US.book Page 24 Monday, November 17, 2003 2:12 PM
