VIDEO PLAYBACK
VID
E
O
RECO
RDI
NG
& PLA
Y
B
ACK
EN
15
MasterPage: Video_Right
The Full-Function Remote Control Unit can operate this
camcorder from a distance as well as the basic
operations (Playback, Stop, Pause, Fast-Forward and
Rewind) of your VCR. It also makes additional playback
functions possible. (
墌
pg. 16)
Installing The Battery
The remote control uses one
lithium battery (CR2025).
1
Pull out the battery holder
by inserting a pointed
instrument into the slot.
2
Insert the battery in the
holder, and be sure to have
the “+” mark visible.
3
Slide the holder back in
until you hear a click.
Beam Effective Area
(indoor use)
When using the remote control,
be sure to point it at the remote
sensor. The transmitted beam’s
approximate effective distance
for indoor use is 5 m (16 ft).
NOTE:
The transmitted beam may not be
effective or may cause incorrect
operation when the remote sensor
is directly exposed to sunlight or powerful lighting.
Buttons And Functions
A
Infrared beam transmitting window
The following buttons are available only when the
camcorder’s Power Switch is set to “PLAY”.
B
AUDIO Button ..................................... (
墌
pg. 25, 28)
C
PAUSE Button* .......................................... (
墌
pg. 16)
Up Button .................................................. (
墌
pg. 16)
D
SLOW Rewind Button ................................ (
墌
pg. 16)
E
REW Button* ....................................... (
墌
pg. 14, 20)
Left Button ................................................ (
墌
pg. 16)
F
INSERT Button .......................................... (
墌
pg. 37)
G
STOP Button* ...................................... (
墌
pg. 14, 20)
Down Button ............................................. (
墌
pg. 16)
H
SHIFT Button ............................................ (
墌
pg. 16)
I
EFFECT ON/OFF Button .......................... (
墌
pg. 16)
J
EFFECT Button ........................................ (
墌
pg. 16)
K
SLOW Forward Button............................... (
墌
pg. 16)
L
FF Button* ........................................... (
墌
pg. 14, 20)
Right Button .............................................. (
墌
pg. 16)
M
PLAY Button* ....................................... (
墌
pg. 14, 20)
N
A. DUB Button ........................................... (
墌
pg. 37)
O
DISPLAY Button ................................. (
墌
pg. 17, 34)
The following buttons are available when the camcorder’s
Power Switch is set to “
A
” or “
M
”.
a
S.SHOT (Snapshot) Button*
b
START/STOP Button*
c
Zoom (T/W) Buttons** ........................ (
墌
pg. 12, 16)
*
Functions the same as each corresponding button on the
camcorder. (
墌
pg. 51)
** Functions when the camcorder’s Power Switch is set to
“PLAY” as well.
Playback Using The Remote Control
1
1
2
3
Slot
Remote sensor
T
W
GR-D94US.book Page 15 Monday, November 17, 2003 2:12 PM
