JVC GET0199-001A Скачать руководство пользователя страница 55

Страница: 55 / 124

ENGLISH

Remedies

Insert discs into the magazine.

Insert discs correctly.

Insert the magazine.

Connect this unit and the
CD changer correctly and press
the reset button of the CD
changer.

Press the reset button of the
CD changer.

Press the reset button on the
control panel. (Your preset
adjustments will also be
erased.) (See page 2.)

Causes

No disc is in the magazine.

Discs are inserted upside down.

No magazine is loaded in the
CD changer.

This unit is not connected to the
CD changer correctly.

The built-in microcomputer may
function incorrectly due to noise,
etc.

Symptoms

• “NO DISC” appears on

the display.

• “NO MAG” appears on

the display.

• “RESET 8” appears on

the display.

• “RESET 1” – “RESET 7”

appears on the display.

• The CD changer does

not work at all.

CD Chang

About mistracking:

Mistracking may result from driving on extremely rough roads. This does not damage the unit and the disc,
but will be annoying.
We recommend that you stop disc play while driving on such rough roads.

This section is only for KD-G801

EN52-57_G801_G701[E_EX]f.p65

1/6/04, 12:10 PM

Содержание GET0199-001A





























































































































Результаты поиска

Содержание GET0199-001A

Отзывы:

Похожие инструкции для GET0199-001A

Бренды по названию

Популярные бренды

JVC GET0199-001A, Инструкция по эксплуатации

Результаты поиска

Содержание GET0199-001A

Отзывы:

Похожие инструкции для GET0199-001A

Бренды по названию

Популярные бренды