22
ENGLISH
To go to the next or previous tracks
To go to a particular track directly
Press the number button corresponding to the
track number to start its playback.
• To select a track number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
• To select a track number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than
one second.
To go to a track quickly (+10 and –10 buttons)
1
Press MODE to enter the functions mode
while playing a CD.
2
Press +10 or –10.
* First time you press +10 or –10 button, the
track skips to the nearest higher or lower
track with a track number of multiple ten (ex.
10th, 20th, 30th).
Then each time you press the button, you can
skip 10 tracks (see “How to use the +10 and
–10 buttons” on page 23).
• After the last track, the first track will be
selected, and vice versa.
Press
¢
briefly, while
playing a CD, to go ahead to the
beginning of the next track.
Each time you press the
button consecutively, the
beginning of the next tracks is
located and played back.
Press
4
briefly, while playing a CD, to go
back to the beginning of the current track.
Each time you press the button consecutively,
the beginning of the previous tracks is located
and played back.
To skip 10 tracks* forwards to
the last track
To skip 10 tracks* backwards
to the first track
To stop play and eject the CD
Press
0
.
CD play stops and the control panel moves
down. The CD automatically ejects from the
loading slot.
• If you change the source or turn the power off,
CD play also stops (without ejecting the CD).
Next time you select “CD” as the source, CD
play starts from where playback has been
stopped previously.
To return the control panel to its previous
position,
press
0
again.
• If you keep the loading slot fully open for
1 minute, (beeps sound when the “BEEP
SWITCH” is set to “BEEP ON”—see page 37)
the control panel automatically returns to its
previous position.
Be careful not to get the disc or your finger
caught in between the control panel and the
unit.
Notes:
• If the ejected disc is not removed for about
15 seconds, the disc is automatically inserted again
into the loading slot to protect it from dust.
(Disc play will not start this time.)
• You can eject the disc even when the unit is turned
off.
Locating a track or a
particular portion on a CD
To fast-forward or reverse the track
Press and hold
¢
,
while playing a CD, to fast-
forward the track.
Press and hold
4
, while playing a CD, to
reverse the track.
EN21-24_KD-G807[EE]f.p65
1/15/04, 2:09 PM
22