15
SPLIT
L image is displayed on the left of the SPLIT line, and R image on
the right. You can check the difference between the images from
the two cameras.
LR SEQ.
Images for the left and right eyes are displayed alternately at
0.5-second interval.
●
A marker appears on the upper part of the screen, which
distinguishes between L and R images.
L image:
Upper left
R image:
Upper right
R SHIFT
L and R images are overlapped. You can move the R image
horizontally and check the difference between the images.
●
While “R SHIFT” is active, the images are corrected according to
the check using the circular polarizing glasses.
ANAGLYPH
L and R images colored red and blue separately are overlapped.
You can move the R image horizontally and check the difference
between the images.
INDIVIDUAL
Either L image or R image is displayed.
●
Each time you press SELECT button, the picture changes in the
following order.
●
A marker appears on the upper part of the screen, which
distinguishes between L and R images.
L image:
Upper left
R image:
Upper right
LR SWAP
L and R images are exchanged and then displayed. You can
exchange the images without repluging the terminals.
●
The setting is retained even when the menu closes. Note that L
and R images have been exchanged when the setting is set to
“ON.”
L image
R image
SDI IN
SDI IN
1/L 2/R
SDI IN
SDI IN
1/L
2/R
LR SWAP “OFF”
LR SWAP “ON”
L and R images not correspondent
L and R images correspondent
H line
L
R
L
R
0.5 sec.
0.5 sec.
0.5 sec.
0.5 sec.
L image
R image
L image
R image
H line
SPLIT line
L
POSITION knob/PUSH SEL. button
You can move the displayed SPLIT line/H line/R image (only in “R SHIFT” or “ANAGLYPH”) by turning
the POSITION knob.
To move right/up:
Turn the POSITION knob clockwise.
To move left/down:
Turn the POSITION knob counterclockwise.
To select a line to move:
Press the PUSH SEL. button.
●
Pressing and holding the PUSH SEL. button for 3 seconds or longer resets the lines and R image to the default positions.
●
The intensities of the SPLIT and H lines can be changed in “L. INTENSITY” under the MAIN MENU “3D SETTING.” (
→
page 19)
DT3D24G1̲EN.indb 15
DT3D24G1̲EN.indb 15
11.1.25 0:53:50 PM
11.1.25 0:53:50 PM
