JVC DR-MV4SU, Инструкция по эксплуатации

Страница: 71 / 84

Masterpage:Right+
EN
71
Filename [MV4S_13Subsidiary.fm]
SUBSIDIARY SETTINGS
Page 71Monday, 9 May 2005 09:42
VIDEO IN/OUT
8
MONITOR TYPE — 4:3LB / 4:3PS / 16:9 AUTO / 16:9 FIX
You can select the monitor type depending on the TV used when
you play back DVD VIDEO discs recorded for wide-screen TVs. For
details, refer to “Monitor Set” (
墌
pg. 23).
8
FRONT AUX F-1 — VIDEO / S-VIDEO
Select the appropriate mode depending on the connector (F-1)
being used on the front panel. (
墌
pg. 40)
VIDEO
: To use the [VIDEO] input connector on the front panel.
S-VIDEO
: To use the [S-VIDEO] input connector on the front panel.
8
REAR AUX L-1 — VIDEO / S-VIDEO
Select the appropriate mode depending on the connector (L-1)
being used on the rear panel. (
墌
pg. 41)
VIDEO
: To use the [VIDEO INPUT] connector on the rear panel.
S-VIDEO
: To use the [S-VIDEO INPUT] connector on the rear
panel.
RECORDING SET
8
SAVE AS LIBRARY — OFF / ON
When this function is set to “ON”, the recording information is
automatically stored in the library. For details, refer to “Modify
Library Information” (
墌
pg. 65).
8
XP MODE REC AUDIO — DOLBY DIGITAL / LINEAR PCM
You can select the audio format when you record a title in XP
mode. When this function is set to “LINEAR PCM”, you can obtain
a high-quality audio sound.
DOLBY DIGITAL
: To record in Dolby Digital format.
LINEAR PCM
: To record in Linear PCM format.
8
2ND AUDIO RECORD — OFF / ON
When this function is set to “ON”;
If a SAP program is received, the SAP audio is recorded on L/R
tracks. The main audio is not recorded.
If a non-SAP program is received, the main audio is recorded on L/
R tracks.
When this function is set to “OFF”, the SAP audio cannot be
recorded.
NOTE:
When the channel is changed on the unit;
For DVD deck
●
The “MONO” indicator appears on the screen for about 5 seconds if
the program is a monaural broadcast.
●
The “STEREO” indicator appears on the screen for about 5 seconds
if the program is a stereo broadcast.
●
Both “STEREO” and “SAP” indicators appear when a stereo program
is accompanied by SAP sound.
●
Both “MONO” and “SAP” indicators appear when the main audio on
the monaural broadcast is accompanied by SAP sound.
For VHS deck
●
The “ST” appears on the front display panel for about 5 seconds if the
program is a stereo broadcast.
●
The “SAP” appears on the front display panel for about 5 seconds if
the program is a SAP broadcast.
●
Both appear when a stereo program is accompanied by SAP sound.
DISPLAY SET
8
SUPERIMPOSE — OFF / AUTO
When this function is set to “AUTO”, various operational indicators
appear on the TV screen. Messages appear in the selected
language. (
墌
pg. 20)
OFF
: To turn off superimposed indications.
AUTO
: To superimpose operational indications for approximately
five seconds just after the corresponding operation.
NOTES:
●
Even when “SUPERIMPOSE” is set to “OFF”, you can display the
various operational indicators by pressing
ON SCREEN . To clear the
operational indicators, press ON SCREEN again.
●
When you use this unit as the source player for editing, be sure to set
“SUPERIMPOSE” to “OFF” before starting. (
墌
pg. 71)
●
When you select “AUTO”, during playback, the operation mode
indicators may be disturbed depending on the type of disc being
used.
8
GRAY BACK — OFF / ON
When this function is set to “ON”, the TV screen becomes all gray
when receiving a channel not in use.
NOTE:
When you want to receive an unstable channel with poor signals, set
this function to “OFF”.
8
DIMMER — BRIGHT / DIMMED1 / DIMMED2 / OFF
You can change the brightness of the front display panel.
BRIGHT
: To turn on the light on the front display panel.
DIMMED1/DIMMED2
: To change the brightness level.
OFF
: To turn off the light on the front display panel.
8
POWER SAVE — OFF / ON
When this function is set to “ON”, you can reduce the power
consumption while the unit is turned off.
●
During Power Save mode —
— the front display panel will be turned off.
●
Power Save does not work when —
— the unit is in the Timer mode.
— the unit’s power is turned off after timer-recording or Instant Timer
Recording.
— the Automatic Satellite Program Recording mode is engaged.
(
墌
pg. 35)
●
It takes some time for the unit to complete initialization after you turn
on the unit power, with “WAKE UP” blinking on the front display panel.
8
ON SCREEN LANGUAGE — ENGLISH / FRANCAIS /
ESPAÑOL
This unit offers you the choice to view on-screen messages in 3
different languages.
For details, refer to “On-screen Language Set” (
墌
pg. 20).
MV4S_13Subsidiary.fm Page 71 Monday, May 9, 2005 9:42 AM