H
EN
92
Sound
Sound settings
(HDD, DVD-RAM/-RW(VR)/-R(VR))
This unit can receive NICAM programmes.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT:
0
If receiving NICAM, set
Setup Menu
A
AUDIO REC
B
=
A
NICAM
B
[
P101]
W
0
For NICAM Bilingual broadcast, NICAM FM Sound will be output when the following setting is set.
Setup Menu
A
AUDIO REC
B
=
A
MONO
B
[
P101]
W
0
If connected via digital audio, set
Setup Menu
A
DIGITAL AUDIO OUT
B
=
A
PCM ONLY
B
[
P98]
D
. Otherwise,
the audio cannot be switched.
0
DVD-RW/-R (Video mode) disc does not support bilingual sound. When recording or dubbing to these discs, set the
recording sound in advance.
Setup Menu
A
VIDEO MODE RECORDING AUDIO
B
[
P100]
N
0
When stereo or monaural programmes are recorded or dubbed on DVD-RAM or DVD-RW/-R (VR mode) discs, the
display shown will be
.
Relationship between disc type and sound output
Setup Menu
A
DIGITAL AUDIO OUT
B
[
P98]
D
Programme type
On-screen display and sound output
Regular Monaural
Normal monaural sound
NICAM STEREO
NICAM stereo sound
NICAM Bilingual
NICAM main audio
NICAM sub audio
NICAM Main+Sub audio
NICAM FM Sound
0
Switches each time
AUDIO
is pressed. (Excluding NICAM FM Sound.)
NICAM Monaural
NICAM monaural sound
External Source
Stereo
Left audio
Right audio
0
Switches each time
AUDIO
is pressed.
Disc playback
media
Sound format
DIGITAL AUDIO OUT setting
STREAM/PCM
DOLBY DIGITAL/PCM
PCM ONLY
DVD Video
48/96 kHz 16/
20/24 bit
Linear PCM
48 kHz 16 bit Linear PCM
Dolby Digital
Dolby Digital Bitstream
48 kHz 16 bit Linear PCM
MPEG
MPEG Bitstream
48 kHz 16 bit Linear PCM
DTS
DTS Bitstream
(No Output)
Audio CD
DTS
CD-DA
44.1 kHz 16 bit Linear PCM
Video CD, Super Video CD
CD-ROM/R/RW
MP3
Linear PCM
DR-MH300SE.book Page 92 Thursday, November 24, 2005 9:12 AM
