JVC DLA-VS4010 страница 24 Скачать руководство пользователя

Страница: 24 / 64

Turning On the Main Power

Check to ensure that this projector, computer, and switching hub are properly

connected

Connect the power cord to the power input terminal of this projector

Power Cord
(Supplied)

CAUTION

Do not connect the power cord when a lens (optional) is not attached.

You can secure the power cord to this projector.

Attach the plug holder to the power cord.

Insert the plug holder into the projector until

the upper and lower securing levers are

locked.

Insert plug into the power outlet on the wall

Remove the lens cap

Turn on the main power of the projector to set to [

]

The [STANDBY/ON], [LAMP] and [WARNING] indicators light up for about 45 seconds. Thereafter, only the

[STANDBY/ON] indicator lights up in red.

MEMO

The default IP address of all DLA-VS4010 / DLA-VS4810 is “192.168.0.2”. If multiple units of DLA-VS4010 / DLA-

VS4810 are used on the same network, do not turn on the main power of more than one projector unit at the same

time. Doing so will result in duplication of the IP address, and thereby preventing proper access.

When using multiple units of DLA-VS4010 / DLA-VS4810, turn on the main power of the second unit and configure

accordingly only after configuration of the first unit is complete. Configure subsequent units using the same

procedure.

When duplication occurs in the IP address, make sure that only one unit of DLA-VS4010 / DLA-VS4810 is connected

on the same network (turn off the main power of the other DLA-VS4010 / DLA-VS4810 units). Allow a time interval

of at least 10 minutes before accessing. If access fails, turn off the power of all network equipments on the same

network, followed by turning them on again.

AC INLET

Securing Levers
(Upper and lower)

Network Settings

Содержание DLA-VS4010

































































Результаты поиска

Содержание DLA-VS4010

Отзывы:

Похожие инструкции для DLA-VS4010

Бренды по названию

Популярные бренды

JVC DLA-VS4010, Инструкция по эксплуатации

Результаты поиска

Содержание DLA-VS4010

Отзывы:

Похожие инструкции для DLA-VS4010

Бренды по названию

Популярные бренды