background image

Safety Precautions

.

IMPORTANT INFORMATION

WARNING:

TO PREVENT FIRE OR SHOCK HAZARDS, DO 
NOT EXPOSE THIS APPLIANCE TO RAIN OR 
MOISTURE.

About the installation place

Do not install the projector in a place that cannot 
support its weight securely.
If the installation place is not sturdy enough, the 
projector could fall or overturn, possibly causing 
personal injury.

WARNING:

THIS APPARATUS MUST BE EARTHED.

CAUTION:

To reduce the risk of electric shock, do not remove 
cover. Refer servicing to qualified service personnel.

This projector is equipped with a 3-blade grounding 
type plug to satisfy FCC rule. If you are unable to 
insert the plug into the outlet, contact your electrician.

MACHINE NOISE INFORMATION (Germany

only)

Changes Machine Noise Information Ordinance 3.
GSGV, January 18, 1991: The sound pressure level
at the operator position is equal or less than 70 dB
(A) according to ISO 7779.

FCC INFORMATION (U.S.A. only)
CAUTION:

Changes or modification not approved by JVC could 
void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to 
comply with the limits for a Class A digital device, 
pursuant to Part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection 
against harmful interference when the equipment is 
operated in a commercial environment. This 
equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in 
accordance with the instruction manual, may cause 
harmful interference to radio communications. 
Operation of this equipment in a residential area is 
likely to cause harmful interference in which case 
the user will be required to correct the interference 
at his own expense.

PORTABLE CART WARNING
(symbol provided by RETAC)

S3126A

-

-

-

-
-

-

-

-

-

-

-

-

IMPORTANT SAFEGUARDS

Electrical energy can perform many useful functions. 
This unit has been engineered and manufactured to 
assure your personal safety. But IMPROPER USE 
CAN RESULT IN POTENTIAL ELECTRICAL 
SHOCK OR FIRE HAZARD. In order not to defeat  
the safeguards incorporated into this product, 
observe the following basic rules for its installation, 
use and service. Please read these Important 
Safeguards carefully before use.

All the safety and operating instructions should be 
read before the product is operated.
The safety and operating instructions should be 
retained for future reference.
All warnings on the product and in the operating 
instructions should be adhered to.
All operating instructions should be followed.
Place the projector near a wall outlet where the plug 
can be easily unplugged.
Unplug this product from the wall outlet before 
cleaning. 
Do not use liquid cleaners or aerosol cleaners. Use 
a damp cloth for cleaning.
Do not use attachments not recommended by the 
product manufacturer as they may be hazardous.
Do not use this product near water. Do not use 
immediately after moving from a low temperature to 
high temperature, as this causes condensation, 
which may result in fire, electric shock, or other 
hazards.
Do not place this product on an unstable cart, stand, 
or table. The product may fall, causing serious injury 
to a child or adult, and serious damage to the 
product. The product should be mounted according 
to the manufacturer’s instructions, and should use a 
mount recommended by the manufacturer.
When the product is used on 
a cart, care should be taken to 
avoid quick stops, excessive 
force, and uneven surfaces 
which may cause the product 
and cart to overturn, damaging 
equipment or causing possible 
injury to the operator.
Slots and openings in the cabinet are 
provided for ventilation. These ensure reliable 
operation of the product and protect it from 
overheating. These openings must not be blocked 
or covered. (The openings should never be blocked 
by placing the product on bed, sofa, rug, or similar 
surface. It should not be placed in a built-in 
installation such as a bookcase or rack unless 
proper ventilation is provided and the 
manufacturer’s instructions have been adhered to.) 
For proper ventilation, separate the product from 
other equipment, which may prevent ventilation and 
keep a distance.

2

Getting Started

Содержание DLA-VS4010

































































Отзывы: