JVC D-ILA LD-HD2KBE, Инструкция по эксплуатации

Страница: 23 / 72

23
.................................................................................................
SET: INPUT HD H-ADJUST
(Horizontal position of HD signals)
Aligns the horizontal position of normal video images to
high quality images (720p/1080i).
●
Aligns an appropriate image size with the image position
on the screen by using test patterns from the DVD.
Adjustment is first performed at the
A
H/V-Position
B
position of the OSD menu on this unit. This is followed by
the actual adjustment using the HD signals.
.................................................................................................
SET: DVI INPUT LEVEL
(Setting for DVI digital input signals)
Sets the signal level of DVI input signals.
●
Sets to match the signal level of your input device.
.................................................................................................
SET: VIDEO INPUT
(Input setting for composite video signals)
Sets whether to use the video input terminal or not.
●
When this is set to
A
DISABLE
B
(do not use), the
A
Video
B
item cannot be selected for
A
INPUT
B
in the OSD menu.
●
It is not possible to set all terminals to
A
DISABLE
B
(do not
use).
A
SET: VIDEO INPUT
B
will be automatically set to
A
ENABLE
B
(use) upon doing so.
.................................................................................................
SET: S-VIDEO INPUT
(Input setting for S-video signals)
Sets whether to use the S-video input terminal or not.
●
When this is set to
A
DISABLE
B
(do not use), the
A
S-Video
B
item cannot be selected for
A
INPUT
B
in the OSD menu.
.................................................................................................
SET: RGB INPUT
(Input setting for RGB signals)
Sets whether to use the RGB input terminal or not.
●
When this is set to
A
DISABLE
B
(do not use), the
A
RGB
B
item cannot be selected for
A
INPUT
B
in the OSD menu.
.................................................................................................
SET: YCrCb INPUT
(Input setting for component video signals)
Sets whether to use the component video input terminal
or not.
●
When this is set to
A
DISABLE
B
(do not use), the
A
YCrCb
B
item cannot be selected for
A
INPUT
B
in the OSD menu.
.................................................................................................
SET: DVI INPUT
(Input setting for DVI digital signals)
Sets whether to use the DVI input terminal or not.
●
When this is set to
A
DISABLE
B
(do not use), the
A
DVI
B
item cannot be selected for
A
INPUT
B
in the OSD menu.
.................................................................................................
SET: PASSTHRU INPUT
(Pass-through input setting)
Sets whether to use pass-through or not.
.................................................................................................
SET: RGB INPUT SYNC
(RGB sync signal setting)
Sets the sync signal during RGB signal input.
●
This setting is enabled when RGB input is selected.
●
Select
A
COMPOSITE SYNC
B
for PAL RGB signals.
Setting Values: 0
-
50
Default Value: 25
Setting Values: 16-235, 0-255
Default Value: 0-255
Setting Values: ENABLE, DISABLE
Default Value: ENABLE
Setting Values: ENABLE, DISABLE
Default Value: ENABLE
Setting Values: ENABLE, DISABLE
Default Value: ENABLE
Setting Values: ENABLE, DISABLE
Default Value: ENABLE
Setting Values: ENABLE, DISABLE
Default Value: ENABLE
Setting Values: ENABLE, DISABLE
Default Value: ENABLE
Setting Values: SYNC ON GREEN, COMPOSITE SYNC
Default Value: SYNC ON GREEN
ENGLISH
LD-HD2KU_E.book Page 23 Thursday, November 17, 2005 4:27 PM