JVC D-ILA DLA-SX21S, Инструкция по эксплуатации

Страница: 50 / 58

50
1000h
EXIT
Lamp replacement
EXIT
Lamp replacement
EXIT
WARNING
What to do when these messages are displayed
When the “Lamp time” reaches 1000 hours
[
A message indicating “1000 h” appears on the projected screen.
• Press any key to delete the message.
Every time the projector is turned on, this message appears on the screen
when the accumulated lamp time reaches between 1900 hours to 2000 hours.
[
Press any button to delete the message.
Get ready a new light-source lamp or replace the light-source lamp at
this point.
The word “Warning” appears and blinks when the accumulated lamp time
reaches 2000 hours.
The message can be cleared by pressing the EXIT button. However, the
same message will appear again every one-hour.
Once the projector is turned off, it does not turn on again if the accumulated
lamp time has exceeded 2000 hours.
When the accumulated lamp time reaches 2010 hours, the projector is forci-
bly shut off and cannot be turned on again.
[
Replace the light-source lamp and reset the “Lamp time”.
(
☞
page 43, 45)
Message Cause (Contents)
Note
The message display language corresponds to the menu language set-
ting. This is set to “English” when the projector is bought. The display
language can be selected from 8 languages. (
☞
page 39)
However, the input mode (PC 1,PC 2, PC 3, Y/C, VIDEO) and button
indications (FREEZE, D.ZOOM, EXIT) are only displayed in English ir-
respective of the display language setting.