JVC CU-VD40AA, Инструкция по эксплуатации

Страница: 19 / 56

EN
CS
19
Viewing High Quality Images
You can change the video output resolution when the burner is connected to a progressive scan TV
via an HDMI cable or component video cable.
A
Change output resolution during
stop mode.
z
Every press of the button changes the resolution as
follows.
Connection via HDMI cable. (However, the
selections for resolution not supported by TV may
not be displayed.)
Connection via component video cable. (HDMI
cable is not connected.)
Connection via video cable.
Set the resolution to “576i”. Image cannot be
displayed if other settings are being selected. Press
the [RESOLUTION] button and set to “576i”.
B
Select “YES”.
z
If the image is not displayed on the TV after changing
the resolution, do not operate the burner for 15
seconds. The resolution setting before the change is
restored.
NOTES:
z
When HDMI cable is connected, images are not output in
analogue.
z
When “576i” is selected, images are output from both the
VIDEO connector and the COMPONENT VIDEO OUT
connectors.
CAUTION:
z
“AUTO” will be selected automatically when the burner is
connected via an HDMI cable to a TV not supporting the
selected resolution.
z
When the burner is connected to a TV via a component
video cable and the output resolution is set to “1080i” or
“720p”, playback will stop if a digital copy protected (CSS)
disc is played. (
0
P24)
AUTO 576p
720p
1080/50i
1080/60i
576i
576p
720p
1080/50i
1080/60i
YES
CURRENT RESOLUTION : 576i
DO YOU WANT TO SAVE THE SETTINGS?
NO
1. SELECT
2. CONFIRM
CU-VD40A_009_EN.book Page 19 Thursday, April 19, 2007 4:52 PM