29
ENGLISH
Matrix Mode - for the Configuration of Video Walls
Matrix mode can be used without limitation with progressive signals. In the case of interlaced signals the matrix size is limited
to a maximum of 3x3 and a fixed overscan setting of 5 %. This function is not usable with HDMI interlaced signals.
S
Press the button [MENU] to display the main menu
on screen.
S
With the button [
A
] or [
"
] select the menu <Setup>.
S
With the button [
Y
] or [
B
] now select the menu <Ma-
trix Mode> and press the button [
"
] to open the
menu <Matrix Mode>.
S
With the button [
Y
] or [
B
] select the menu option
<Matrix Mode>.
S
With the button [
A
] or [
"
] you can set the desired
matrix size.
The following matrix sizes are selectable: 2x2, 2x3,
3x2, 3x3, 3x4, 4x3 or 4x4.
S
With the button [
Y
] or [
B
] select the menu option
<Display position in matrix>.
S
With the button [
A
] or [
"
] you can set the display po-
sition within the matrix.
The possible display positions result from the pre-
viously set matrix size.
S
With the button [
Y
] or [
B
] select the menu option
<Overscan percentage>.
S
With the button [
A
] or [
"
] you can set the overscan
between 0 and 10 %.
The overscan facility enlarges the picture section
by the preset value for the display sides that are in
contact with each other.
Example: display matrix 2x2
Example: display matrix 2x2
Sides of the enlargement of the picture section
