JVC CO-46LCD-BD, Руководство по эксплуатации

Страница: 30 / 250

28 ENGLISH
Connecting to the VGA input
Use the VGA input to connect a device with a
VGA port.
S Press the [SOURCE] button or [F4] to open the
<Inputs> selection menu.
S With the [
Y
] or [
B
] button choose the input and
press the [MENU] button.
You can choose the VGA input also with the
[PC] button.
Settings for PC (RGB)
S Press the [MENU] button to open the main menu.
S
With the button [
A
] or [
"
]. select the <Setup> menu.
S
Select <Inputs> [
Y
] / [
B
] and press the button [
"
].
Auto Setup
S Press the button [
"
] to start Auto setup.
This function will now attempt to find the optimal pic-
ture settings for the pending signal. During setting
the picture will move slightly back and forth.
H Total
S
You can correct the scanning frequency for the PC
picture here. This function is intended only for com-
petent users.
V Pos.
S Sets the vertical picture position [
A
] / [
"
].
V Size
S Sets the vertical picture size [
A
] / [
"
].
H Pos.
S Sets the horizontal picture position [
A
] / [
"
].
H Size
S
Sets the horizontal picture size [
A
] / [
"
].
Phase
S
Eliminate flickering and distortions.
S To close the menu press the red button.
Select inputs
For the selection of an input use the selection menu
<Inputs>.
S Press the button [SOURCE] or [F4] to open the se-
lection menu <Inputs>.
S
Select input [
Y
] / [
B
] and then press the [MENU]
button.