JVC CamiFlex FG-CAM-F4/U, Руководство пользователя

Страница: 12 / 25

3 OPERATION
3.1 Power Up
Camera should be switch ON after Base Unit and OFF before. During the product power up, Tally and
Fibre LEDs are blinking in orange indicating the product is booting up. This can take a few seconds.
During the system boot, the fibre LED is lighted in yellow during 2 seconds then switch off if the fibre is
correctly connected. If the fibre LED blinks in red, this means there is a connection problem between
Base Unit and Head Unit.
3.2 DC IN
Head Unit can be powered in 2 ways:
a) Through a Hybrid Fibre : the power supply conveyed on the Hybrid Fibre (48V) is internally
converted by Head Unit for internal and external need (13.2V DC OUT - see next section).
Hybrid
Fiber
100-240V~
DC OUT
13.2V 40W
Base Unit Head Unit
Head unit can also be powered locally to give power redundancy
Hybrid
Fiber
100-240V~
DC IN
12V
Base Unit Head Unit
b)
Through local power supply
: Head Unit is powered by DC IN connector (From +8V to +24V IN).
In such case DC OUT is unused.
Tactical
Fiber
100-240V~
DC IN
12V
Base Unit Head Unit
3.3 DC OUT
The Head Unit provide DC OUT in order to power the accessories. This output is active
only when using a Hybrid Fibre
The certified maximum output power is 40W under 13.2V at 200 meters.
-12-
CamiFlex Base Unit – Head Unit