JVC CA-HXZ10, Инструкция по эксплуатации

Страница: 25 / 70

22
Synchronized Recording
By using Synchronized Recording, you can start and stop
both disc play and tape recording at the same time.
Everything on the disc goes onto the tape in the order it is on
the disc, or according to the order you have made for
Program Play.
On the unit ONLY:
1
Press
0
EJECT and insert a recordable
cassette with the exposed part of the tape down.
2
Load a disc.
3
Select a disc.
For audio CDs:
Press the corresponding disc number button (CD1 –
CD5) where a disc is loaded in step
2
, then press
7
.
For MP3 discs:
You can select a track to start recording with.
1) Press the corresponding disc number button (CD1 –
CD5) where a disc is loaded in step
2
, then press
7
.
2) Turn
¢
/
4
to select the group, then press CD
3¥8
.
3) Turn
¢
/
4
to select the track.
CD1 CD2 CD3 CD4 CD5
T
U
N
IN
G
/BEEP
CD
PRESET
T
U
N
IN
G
START
CD REC
T
U
N
IN
G /BEEP
REVERSE MODE
CD1 CD2 CD3 CD4 CD5
4
Press CD REC START.
“CD REC” appears on the display and the
REC (recording) lamp flashes when
recording starts.
The cassette deck starts recording when the
CD player starts playing.
When the recording is done, “CD REC FINISHED”
scrolls on the display, and the REC (recording) lamp turns
off. Both the cassette deck and the CD player stop
automatically.
To stop recording, press
7
to create a 4-second
blank portion on the recording tape. (Remember a
4-second blank is important when using Music
Scan—see page 20.)
To record on both sides—Reverse Mode
On the unit ONLY:
Press REVERSE MODE so that the
Reverse Mode indicator on the display lights
up like—
.
• When using the Reverse Mode for Synchronized
Recording, start recording in the forward (
3
) direction
first. When the tape reaches its end while recording a song
in the forward direction (
3
), the last song will be re-
recorded at the beginning of the reverse side (
2
).
If you start recording on the reverse side (
2
) first, recording
will stop when only one (reverse) side of the tape is recorded.
To cancel Reverse Mode, press the button again so that the
Reverse Mode indicator lights up on the display like— .
When making Sleep Timer settings while doing
Synchronized Recording
Set enough time to allow for the disc to finish playing; otherwise,
the power will go off before recording is completed.
EN21-26.HX-Z10&30[J]1 03.1.17, 11:04 AM 22