![JVC CA-HXZ10 Скачать руководство пользователя страница 20](http://html.mh-extra.com/html/jvc/ca-hxz10/ca-hxz10_instructions-manual_180732020.webp)
17
Track number
Disc number
Program step number
CD PROGRAM
Total track number and
total playing time (Continuous Play)
CD RANDOM
CD PLAY MODE
DOM
PROGRAM
PROGRAM
CANCEL
TAPE
REC
START/STOP
5
SET
/DISPLAY
PRESET
T
U
N
IN
G
CD
Programming the Playing Order of the Tracks
—Program Play
You can arrange the playing order of the tracks before you
start playing.
You can program up to 100 tracks.
• To use Repeat Play (see page 19) for Program Play, press
REPEAT after starting Program Play. Only REPEAT 1 and
REPEAT ALL can be selected for Program Play.
• There is a time limit in doing the following steps. If the setting
is canceled before you finish, start from step
2
again.
1
Load discs.
• If the current playing source is not the CD player, press
CD
3¥8
, then
7
before going to the next step.
2
Activate Program Play.
On the unit:
Press CD PLAY MODE repeatedly
until “CD PROGRAM” appears
on the display.
• Each time you press the button, the play
mode changes as follows:
On the remote control:
Press PROGRAM so that
“CD PROGRAM” appears
on the display.
The PROGRAM indicator lights up on the display.
• If a program has been stored in memory, the program is
called up.
3
Press one of the disc number buttons (CD1 –
CD5) to select the disc you want.
CD1
CD2
CD3
CD4
CD5
4
Select a track from the selected disc in step
3
.
• Program step numbers exceeding 100 cannot be
programed.
• When making programs from MP3 discs, the unit only
recognizes tracks like audio CD. You cannot make
programs using group numbers.
On the unit:
Turn
¢
/
4
to
select the track
number, then
press
SET/DISPLAY.
On the remote control:
Press the number buttons.
• For how to use the number buttons,
see “To go to another track directly
using the number buttons” on page
16.
5
Program other tracks you want.
• To program tracks from the same disc, repeat step
4
.
• To program tracks from a different disc, repeat steps
3
and
4
.
6
Press CD
3¥8
.
The tracks are played in the order you
have programed.
• If the playing disc is an MP3 disc, the MP3 indicator
lights up.
To stop playing,
press
7
.
To exit from Program Play,
press CD PLAY MODE
repeatedly until the PROGRAM indicator goes off (or press
PROGRAM on the remote control) after playback stops.
•
If you try to program a 101st track,
“CD FULL” appears on the
display.
•
If you have tried to program a track from an empty tray,
“NO
READ # (number)” or “NO DISC # (number)” will appear on the
display for 2 seconds.
•
If you have tried to program a track number that does not
exist,
it is ignored.
•
If you try to open a disc tray during Program Play,
the disc
tray does not come out. Open disc trays after canceling Program
Play.
FM MODE
EN13-20.HX-Z10&30[J]f
03.2.3, 4:38 PM
17