background image

31

2-4 Other Settings with V.Networks Setup Tool [3. Motion Detection Setting] (continued)

V.Networks General Setting

Refresh Interval

The reference image on which motion detec-

tion is based is refreshed at a regular inter-
val.  In a condition where the reference im-
age changes, like outdoors, set a low value.

Note

With the interval set to “0 second,” the
reference image is automatically re-
freshed if a motion is not detected for
10 seconds.

Motion Distinction Interval

This is for setting the minimum duration of

time for which the object being monitored
must move to be recognized as “motion.” If
the object is slow moving, the time should be
longer to avoid detection errors.

Available MASK

Areas outside the one already set for motion

detection (displayed in yellow) can also be
selected.

Reference Image

For checking the reference image. The screen

below is displayed.

Refresh

Press this button to refresh the reference

image.

3

.

Press [Detail] to display [Motion Detection Setting].

Parameters

Y Threshold

A smaller value allows motion detection even

if the difference of brightness with the refer-
ence image is insignificant.

%

Set to a smaller value if the moving object is

not large enough and cannot be detected.

Noise Filter

Set to a larger value to reduce noise in the

whole image.

Updates the reference image.

If this is selected, the reference image is auto-
matically refreshed at a designated interval.

VN-C10_E_01-43.pm6e

03.4.24, 9:54 AM

31

Содержание C11U - VN Network Camera















































































Отзывы: