JVC C11U - VN Network Camera Скачать руководство пользователя страница 72

Страница: 72 / 78

Operations (Step 6 Operations with a Web Browser)

6-4 Settings with a Web Browser (5. FTP Settings) (Continued)

Item

Effect

FTP Function

For enabling/disabling the FTP functions.

Snap Shot FTP

Select here if JPEG images are to be uploaded to an FTP ser ver regu-
larly.

Upload Interval

Specify the interval with which images are uploaded to an FTP server.

(0 to 84600 seconds)

File name

Specify the file name of an image to be uploaded.

*.jpg

Uploading is performed with the file name entered here.

❈

Only one image file remains in the FTP server as files have the

same file name. (The latest image file overwrites.)

Time Stamp

The current time, obtained from the NTP server, is used as the file name
for uploading in the form of “YYYY-MM-DD-HH-MM-SS-mmm”.

❈

As each file has an unique name for uploading, all image files

uploaded remain in the FTP server.

Username

Enter the user name (up to 16 characters) to be used for verification with
the FTP server.

Password

Enter the password (0 to 32 characters, shown as asterisks “ * ”) to be
used for verification with the FTP server.

Host IP Address

Enter the IP address of the FTP server to which images are uploaded.

FTP Port

Enter the port number of the FTP server to which images are uploaded.

FTP Folder

Enter the folder name in the FTP server to which images are uploaded.

Connection

Set whether to cut off the connection during every upload.

Disconnect every time

If this is selected, connection is cut off every time an image has been
uploaded.

Connection will be reestablished when the next image is uploaded

Error Recovery

Specify the action to be taken when an FTP error has occurred.

On connect error

Specify the action to be taken when an error with TCP connection or
FTP verification has occurred.

Retry forever

Error recovery is attempted until the power to VN-C11 is disconnected.

Retry for * min

Error recovery is attempted for a specified period of time.
(1 to 600 minutes)

On transfer error

Specify the action to be taken when a file transfer error has occurred
during image uploading.

Stop Uploading

With the occurrence of a transfer error, the VN-C11 FTP function is auto-
matically disabled. Select here to enable the function again.

VN-C10_E_62-78.pm6e

03.4.24, 9:50 AM

Содержание C11U - VN Network Camera















































































Результаты поиска

Содержание C11U - VN Network Camera

Отзывы:

Похожие инструкции для C11U - VN Network Camera

Бренды по названию

Популярные бренды

JVC C11U - VN Network Camera, Инструкция по эксплуатации

Результаты поиска

Содержание C11U - VN Network Camera

Отзывы:

Похожие инструкции для C11U - VN Network Camera

Бренды по названию

Популярные бренды