E-23
English
1
[CAMERA]
To output the camera images.
(
☞
Page 6
5
[SOURCE SELECT] Buttons)
2
[FREEZE]
To make the camera image still.
(
☞
Page 6
4
[FREEZE] Button)
3
[EXT-IN]
The images of the device connected to the [EXT INPUT] terminal
will be outputted.
(
☞
Page 6
5
[SOURCE SELECT] Buttons)
4
[SD CARD]
To perform functions related to SD card.
●
While displaying images from other sources, SD selection mode
will be activated if this button is pressed.
(
☞
Page 6
5
[SOURCE SELECT] Buttons)
5
[BRIGHT]
To adjust the brightness of the camera image.
(
☞
Page 6
2
[BRIGHT] Adjustment Buttons)
6
[FOCUS]
To adjust the focus of the camera image.
(
☞
Page 6
3
[FOCUS] Button)
7
[ZOOM]
To reduce or enlarge the camera image.
(
☞
Page 6
1
[ZOOM] Adjustment Buttons)
8
[AUTO WHITE]
To adjust the white balance automatically.
(
☞
Page 7
$
[WHITE BALANCE] Adjustment Buttons)
*For details on the various functions, refer to page 6.
Operating the Remote Control Unit
The following functions are available with the use of the remote control unit.
䡵
Remote control receiving range
The receiving range is about 5m.
The vertical plane is
±
15˚ and the horizontal plane is
±
30˚.
CAMERA
FREEZE
EXT-IN
AUTO
AUTO
AUTO
WHITE
BRIGHT
IMAGE SEL.
FOCUS
OUT
IN
SD CARD
ZOOM
3
1 2
4
5
6
7
8
Up down
±
15˚
Left right
±
30˚
5m