background image

35

AV-32T4SA / LCT1673-001A-H/ English

Troubleshooting

If a problem arises while you are using the TV, please read this “Troubleshooting” well before 

you request having the TV repaired. You may be able to fix it easily by yourself. For example, if 
the AC plug is disconnected from the AC outlet, or the TV aerial has problems, you may think 
there is a problem with the TV itself.

Important:

• This Troubleshooting guide only covers problems whose cause are not easy to determine. If a 

question arise when you are operating a function, read the page(s) corresponding to the 
operation of the function well, not this Troubleshooting guide.

• After you have followed the Troubleshooting description or the operating description of the 

functions concerned without any success, remove the AC plug from the AC outlet and request 
a repair of your TV. Do not attempt to repair the TV by yourself or remove the rear cover of 

the TV.

• Flashing of the power lamp indicates a malfunction. 

Unplug the mains plug and ask for your TV to be repaired.

„

If you cannot turn on the TV

• Is the AC plug connected to the AC 

outlet?

„

No picture/No sound

• Have you chosen a TV channel whose 

reception is extremely bad? In this case, 
the BLUE BACK function will be 
activated, the entire screen becomes blue, 

and the sound is muted. In spite of this, if 
you want to view the TV channel, follow 
the description “BLUE BACK” on 

page 22 to try to change the BLUE BACK 
function setting to OFF.

• If the SYSTEM setting for a TV channel 

is incorrect, it may prevent the sound 
from being issued. Follow the description 

“EDIT/MANUAL” on page 24 to use the 
MANUAL function to try to change the 
SYSTEM setting.

„

Poor picture

• If noise totally obscures the picture 

(snow), the aerial or aerial cable may have 
trouble. Check the following to try to 

solve the trouble:

Has the TV and aerial been connected 
properly?

Has the aerial cable been damaged?
Is the aerial pointed to the right 
direction?

Is the aerial itself faulty?

• If the TV or aerial receives interference 

from the other devices, stripes or noise 
may appear in the picture. Move such 

devices as an amplifier, personal 
computer, or a hair drier that can cause 
interference away from your TV, or try 

changing its location. If the aerial suffers 
interference from a radio tower or high-
voltage wire, please contact your local 

dealer.

• If the TV receives interference from 

signal reflecting from mountains or 
building, double-pictures (ghosting) will 
occur. Try to change the aerial’s direction 

or replace the antenna with the one with 
better directionality.

• Are your COLOUR SYSTEM settings for 

the TV channels correct? Follow the 
description “COLOUR SYSTEM” on 

page 19 to try to solve the trouble.

• Has COLOUR or BRIGHT been 

controlled properly? Follow the 
description “BRIGHT” or “COLOUR” on 
page 18 to try to adjust them properly.

• Videotaping teletext is not recommended 

because it may not record correctly.

• When a white and bright still image (such 

as a white dress) is displayed on the 

screen, the white part may look as if it 
were coloured. It is a phenomenon 
unavoidable due to the nature of the 

picture tube itself, and not due to a TV 
failure. When the picture disappears from 
the screen, the unnatural colours will also 

disappear.

AV-32T4S_Eng.book  Page 35  Monday, June 21, 2004  10:40 AM

Содержание AV-32T4









































Отзывы: